Features
1.SDA series compact pneumatic cylinder are very wide used in automation line, compact desigh save much more sapce.
2.Normally bore size: 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm.
3.Available built-in magnet.
4.With self-lub bearing, the piston rod is lubrication free. Use rubber cushion for standard type to keep the cylinder operating soomthly, safely and quietly.
5.Easier and various mounting via female threads or mounting accessories.
If you are interested in our products, PLS contact us.
Specifications
Specifications:SDA Series |
|
|
|
|
|||||||
Bore size(mm) |
12 |
16 |
20 |
25 |
32 |
40 |
50 |
63 |
80 |
100 |
|
Action |
Double acting,single/double rod |
||||||||||
Fluid |
Filtered compressed air |
||||||||||
Proof pressure |
1.5Mpa |
||||||||||
Operating pressure range |
0.1~0.9Mpa |
||||||||||
Ambient and fluid temperature |
-10~70ºC(No freezing) |
||||||||||
Port size |
|
M5×0.8 |
Rc1/8 |
Rc1/4 |
Rc3/8 |
||||||
Piston rod thread |
Female thread |
M3X0.5 |
M4X0.7 |
M5X0.8 |
M6X1.0 |
M8X1.25 |
M10X1.5 |
M14X1.5 |
M18X1.5 |
||
Male thread |
M5X0.8 |
M6X1.0 |
M8X1.25 |
M10X1.25 |
M14X1.5 |
M18X1.5 |
M22X1.5 |
M26X1.5 |
|||
Cushion |
|
Rubber bumper |
Ordering Code
Dimensions
Detail Show
1.Could i put my own logo on it?
> Sure, customers' logo can be made by laser, engraved, embossed, transfer
2.Could i buy 1pc sample first and small order ?
> Of course, support sample order and small order, especially for new customers under certain condition.
3.If i have my thoughts, do you have person to design according to my concept?
> Certainly,our design team is willing to do for you.
4.What's your main product?
>Pneumatic Cylinder,Pneumatic Fittings,Pneumatic Cylinder Tube,Pneumatic Filters,Throttle,Check Valve,Pneumatic Solenoid etc.
Thanks for your reading. If any product meets your need, Welcome to send us an email. We are sure your any information can be attention without any delay.