Size Parameters
Model/Spec. | D | D1 | D2 | H | H1 | h | P | z-d |
QS3-04" | 115 | 72 | 100 | 96 | 72 | 3 | 16 | 3-M8 |
QS3-05" | 145 | 95 | 108 | 118 | 85 | 4 | 18 | 3-M8 |
QS3-06" | 180 | 130 | 142 | 130 | 93 | 4 | 20 | 3-M8 |
QS3-08" | 208 | 165 | 180 | 136 | 100 | 5 | 25 | 3-M10 |
QS3-10" | 252 | 206 | 226 | 143 | 102 | 5 | 30 | 3-M10 |
QS3-12" | 322 | 270 | 290 | 160 | 115 | 6 | 30 | 6-M12 |
QS3-15" | 400 | 340 | 368 | 168 | 118 | 6 | 43 | 6-M16 |
It is recommended to grease chucks at least twice a day in order to maximize longevity
Performance Parameters
Model/Spec. |
Jaw Stroke (Diameter) (mm) |
Maximum static clamping force(kgf) |
Maximum static holding force(kgf) |
Permissible pressure(mm) |
Limit speed (r/min) |
Clamping range |
Holding range |
Net weight (Kg) |
QS3-04" | 3.2 | 2040 | 1170 | 0.4-0.8 | 4500 | 2-120 | 15-120 | 5.2 |
QS3-05" | 3.7 | 2850 | 1830 | 0.4-0.8 | 4000 | 3-140 | 15-140 | 8 |
QS3-06" | 4.2 | 4890 | 2650 | 0.4-0.8 | 3600 | 4-180 | 18-180 | 14 |
QS3-08" | 5 | 7140 | 4280 | 0.4-0.8 | 3300 | 5-220 | 20-240 | 23 |
QS3-10" | 6.5 | 9280 | 6120 | 0.4-0.8 | 3000 | 10-260 | 30-280 | 35 |
QS3-12" | 8.5 | 14070 | 9480 | 0.4-0.8 | 2500 | 20-350 | 40-360 | 70 |
QS3-15" | 12 | 19780 | 15000 | 0.4-0.8 | 2000 | 30-420 | 60-440 | 118 |
|
Learn More |
Learn More | |
Learn More | |
Learn More |
lathe chuck lathe chuck lathe chuck lathe chuak lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck