Air flow dryer also called pipe dryer, sawdust flash dryer. This machine is designed for drying material like sawdust, wood shaving, wheat, straw, corn talks, paddy straw etc. The diameter of raw material should be lower than 3mm,and the moisture in the raw materials of less than 40% can be drying one time to meet the requirement for wood briquette production line.
Wood sawdust dryer Features:
1. Suitable for drying materials of moisture 20-40%, after drying moisture can be 12-14%
2. Equipped with heatong stove, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper.
3. Clients can change machine to any angle based on the production field, less floor area and easier installation.
Model | 219 | 325 |
Power | 4KW | 5.5KW |
Capacity | 400KG/H | 800KG/H |
Initial Moisture | 20%-40% | 20%-40% |
Final Moisture | 12-14% | 12-14% |
Feeding Material Diameter | Less than 5mm | Less than 5mm |
Airflow dryer Operating Procedures
1. After the installation is complete, turn on the fan, check the direction of the fan rotation and whether the suction port is normal.
2. Check the flange interface to see if it leaks.
3. Bundle the bags that are open at both ends at the lower opening of the separator.
4. Add the material to be dried at the feeding port, and remove the large particles before drying, which is beneficial to increase the drying speed.
5. Add fuel to the furnace to ignite and turn on the fan. When the temperature at the wind outlet is as high as 150 °C, the material is cut off and dried.
6. Remove large pieces of material from the slag discharge port in time to facilitate feeding.
Function of Biomass sawdust Dryer
1. Can guarantee the standard rate of the finished products
2. Can solve the problem for the uneven final particle size.
3. Adopts high technology Reliability Precision
4. Unique design.and advanced heating mode by firewood.oil and electricity.
Contact Person: Sarah Zhai
Email: sarah@ainuok. com
WhatsApp/ Phone: +8615737217776
Anyang Ainuok Machinery Equipment Co., Ltd