• Stainlesss steel
• 7 mm, 5/16", 3/8", 12 mm, 1/2", 5/8", 20mm, 25mm
The energy produced by the compression process behaves as heat. The heat is removed before use (or further compression), thus requiring a pre-cooler, intercooler and aftercooler.
Intercooler:
Most industrial compressors currently in operation are multi-stage designs. In order to optimize the cost of compressed gas, it is common to use multi-stage industrial compressors. When the air compressor compresses air, heat is generated, which causes the air to expand, and it is necessary to increase the HP for further air compression. It is suitable for the first and second stages of a multi-stage air compressor. The function of the compressor intercooler is to provide cooler, drier, and denser air for the next stage of compression.
Aftercooler:
The cooler is followed by a heat exchanger that removes heat from the compressed air. The most common compressor after the cooler uses cold ambient air or cold water to remove heat, which also effectively removes moisture from the compressed air.
In choosing a replacement Engine Charge Air Cooler manufactured by CSTHEATEXCHANGER you have selected a product of the highest quality, manufactured from drawings, pattern or survey on-board your vessel.
CSTHEATEXCHANGER Air Coolers A range of block type charge air cooler direct replacement tube nests specifically designed for slow, medium and fast rpm diesel engines in mind using copper fins with variable surface area and range of tube sizes available.
CSTHEATEXCHANGER Air Coolers Constructed using to the same exacting standards as with the copper fin range but manufactured using aluminum fins to the same high standard creating huge cost savings.
Spare Parts
A large range of spare's for most makes & models including
Gasket Sets
End Covers
Fixings
Side Panels and Housings
Complete Tube Nests
Service Exchange Air Coolers
• Stainlesss steel
• 7 mm, 5/16", 3/8", 12 mm, 1/2", 5/8", 20mm, 25mm
• Aluminum
• Copper
• Stainless steel
• Hot deep carbon steel
• Titanium
Hdrophilic, Epoxy coated, bare, e-coating
• Thick. 1 – 3 mm
• Galvanized steel
• Aluminium
• Stainless steel
• Copper
• Brass
1. Coolers for Old ZR Compressor models: ZR2, ZR3, ZR4, ZR5, ZR6.
2. Coolers for New ZR Compressor models: ZR55, ZR75, ZR90, ZR110, ZR132, ZR145, ZR160, ZR200, ZR250, ZR275, ZR300,ZR315, ZR355, ZR400, ZR425, ZR450, ZR500, ZR630, ZR700, ZR750 ZR900.3. Coolers for ZH & ZHC Compressor models: ZH 7000, ZH 10000, ZH 15000
TRE30, TRE40, TRE50, TA60,
TRE70, TRE80, TRE90,TRE100,
TRX90, TRX170, TRX180
Available inter cooler models:
TM400, TM500, TM600, TM700, TM800,
TM900, TM1000, TM1250, TM1500
SM5000, SM6000
Q1: What is your strength ?
A: Design and manufacture.
Q2: How long is your delivery time?
A:Different products' production time is different. Generally, it needs 10 to 40 working days.
Q3: What is your terms of payment ?
A:50% TT deposit in advance, 50% TT balance before delivery.
We provide Alibaba Trade Assurance Service. Welcome for more advise.
Q4: What are your main products ?
A: Our main products are: Industrial heat exchanger, Unit cooler, Charge air cooler, Dry cooler, Condenser, Evapotator, and Coil.
Q5. How to contact with you ?
A: 24hours online from TradeManager, quick answer, or email with us, wechat, skype, whatsapp is available.
Select one product and leave message to us.
Packaging | ||
Size | According to the product | |
Weight | ||
Packaging Details | The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request. |
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* After advancepayment, we will provide the production drawing to the customer for confirmation
* Engineers available to service machinery overseas.