Ai-Thinker 4G Module LTE Module SMS Wireless Data Transmission
Ca-01 4G IoT communication module
Ca-01 is an ultra-small package LTE Cat.1 bis module launched by Ai-Thinker. It uses Ziguang's UIS8910 platform and supports LTE 3GPP Rel.13 technology. It is a 4G full Netcom module, which can adapt to different operators and products Maximum flexibility in product design.
2.2Main performance of the module
|
Feature |
Introduction |
|
Frequency range |
Refer Table 2 Introduction of module model introduction |
|
Transmit power |
¨ LTE-TDD:Class3(23dBm+1/-3dB) ¨ LTE-FDD:Class3(23dBm+-2dB) |
|
Power supply |
¨ VBAT 3.3V ~ 4.3V,typical value3.8V |
|
LTE characteristic |
¨ Up to non-CA CAT1 ¨ Support VOLTE ¨ Support 1.4~20MHz RF bandwidth ¨ LTE-FDD:Maximum uplink rate 5Mbps,Maximum downlink rate 10Mbps LTE-TDD:Uplink-downlink configure 2 Up to 2Mbps(DL),Up to 8Mbps (UL) LTE-TDD:Uplink-downlink configure 1 Up to 4Mbps(DL),up to 6Mbps(UL) |
|
Network Protocol Features |
¨ Support TCP/UDP/PPP/FTP/HTTP/NITZ/CMUX/NDIS/NTP/HTTPS/PING/FTPS/FILE ¨ SMTP/SMTPS/MMS/DTMF is under developing. |
|
USIM card interface |
¨ Support USIM/SIM card:1.8V and 3V |
|
USB interface |
¨ Copatible USB 2.0(only support slave mode),the data transfer rate is up to 480Mbps ¨ For AT commands, data transmission, software debugging, software upgrade ¨ USB Virtual serial port driver:support Windows 7/8.1/10,Linux 2.6.x/3.x/4.1, Android 4.x/5.x/6.x/7.x ,etc USB driver under other operating systems |
|
UART |
UART1: ¨ For AT command and data transfer ¨ Maximum baud rate 921600bps,default 115200bps ¨ Support hardware flow control(CTS/RTS) UART2: ¨ For download software and RF calibration, and also used to communicate with internal Bluetooth HOST UART: ¨ Use for output debugging information ZSP UART: ¨ Use for output debugging information |
|
SPI Camera |
¨ Support |
|
SPI LCD |
¨ Support |
|
Keyboard |
¨ Support 6*6 scan keyboard |
|
Antenna interface |
¨ Characteristic impedance 50 ohm |
|
Physical characteristics |
¨ Size: Air724UG:24mm*24mm*2.3mm ¨ Weight:about 2.6g |
|
Temperature range |
¨ Normal working temperature:-35°C~+70°C ¨ Limit working temperature:-40°C~+85°C |
|
RoHS |
¨ Alll components are compliant RoHS standards |
|
Package |
¨ 117 pins,refer the pin diagram for the actual available pins |
2.3 Functional block diagram
The following figure is the functional block diagram of Ca-01 module, illustrating its main functions
¨ Memory
¨ RF part
¨ Power management
¨ Interface part
2.4 Application interface
The module is packaged in LCC with 117 SMT pad pins. The following sections will elaborate the functions of each interface of Ca-01
1. We can ship the items by DHL, FedEx, TNT, UPS, EMS, and China Mail Post.
2. We need 1-3 days to process the goods after the payment arrived.
3. We are not responsible for any accidents or delays when goods were picked by logistics company.
4. The buyers should be responsible for the freight and import fees when goods arrived at the destination.
Q1: Are you manufacturer? Where is your factory?
A: Yes, we are manufacturer. Our factory is located in Shenzhen, China, and it is about 20 minutes drive from Shenzhen Baoan Airport. Welcome to visit our factory.
Q2: How long is your delivery time?
A: It usually takes 3-5days. Special requirement orders, delivery time is negotiable.
Q3: Is the price on the price list the final price ?
A2: No, the price is still negotiable. It depends on the quantity of your order.
Q4: When can I get the price?
A: Usually we quote within 24 hours after we get inquiry. If your are very urgent to get the price, please call us so that we will quote to you as early as possible.
Q5. How can we know the product quality?
A: We suggest you to order a sample. Also, you can send us email for detail photos for checking if you cannot get enough information in the product page.
Q6: Is custom-made available?
A: Yes. We support custom-made requirements.
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.If you want to get more information about our company, please contact us immediately.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier