Parameters and Configurations | ||||||||
Span length | 8m, 9.6m, 10.8m, 12m, 16m | Adjusted to your request | ||||||
Bay width | 4m, 5m, 8m, 10m | Adjusted to your request | ||||||
Gutter height | From 3.0m to 8.0m | Adjusted to your request | ||||||
Steel structure | Hot-dip galvanized steel frame, no welding joint structure. | |||||||
Cover material | Film with UV and anti-drip layer, PC sheet, 5mm reinforced glass. | |||||||
Shading system | External and internal shading system to block the sunshine | Shading rate from 55% to 99.9% | ||||||
Cooling system | Cooling pad and exhaust fans, GSHP system avialable. | |||||||
Heating system | Gas/Coal/Oil fired boiler with blowers, GSHP system with coil fans | |||||||
Other system | Ventilation system, thermal insulation system, seedbed system, irrigation system, lighting system, IOT system etc. |
Technical standards we follow | ||||||||
1 | Q/JBALI-2000 General standard of greenhouse | |||||||
2. | GB/T18622-2002 Design load of greenhouse structure | |||||||
3 | GBJ17-88 General standard of steel structure | |||||||
4 | GB/T 18621-2002 Design standard of ventilation and cooling system | |||||||
5 | GB/T5237-93 Standard of aluminum alloy building profiles | |||||||
6 | GBJ114-88 Standard of heating, ventilation and air conditioning design | |||||||
7 | SL103-95 Micro-irrigation engineering technology code | |||||||
8 | GBJ52-83 Industrial and civil power supply system design code | |||||||
9 | Standard request from your side to meet your requirements |
Item | Raw material | Dimension (mm) | |||||
Main columns | Double side hot-dip galvanized steel tubes | 50*100, 60*80, 100*100 etc, adjusted on the climate condition | |||||
Anti-wind columns | Double side hot-dip galvanized steel tubes | 30*50, 50*50, 50*100 etc, adjusted on the wind speed | |||||
Gutter | Hot-dip galvanized steel, stainless steel, aluminum alloy available | Thickness 2.0 most common, adjusted and customized | |||||
Truss | Steel tube and angle steel, welded and then galvanized | Length from 8000 to 12000, adjusted and customized | |||||
Other | Designed and customized for different project, listed in the quotation sheet for you. |
Advantages | ||
1 | Main part from design, produce, assembly, all done in our workshop | |
2 | No welding joint structure with high corrosion and rust resistance | |
3 | All connectors on greenhouse produced by us and all bolts are hot-dip galvanized | |
4. | Main structure with 15 years quality assurance and spare parts available all time |