Agricultural electric water pump for irrigation in pakistan
Agricultural electric water pump for irrigation in pakistan
PUMP SPECIFICATIONS
|
·Usage: |
Clean Water |
|
·Type: |
MIS End Suction Water Pump |
|
·Capacity |
6.3-- 400 m3/hr |
|
·Head |
5- 125 m |
|
·Speed: |
1450/2900 rpm |
|
·Suction diameter: |
50mm to 200mm |
|
·Fluid Temperature |
Up to 80 ℃ |
|
·Casing & Cover |
Cast/ductile iron |
|
·Shaft |
Carbon steel |
|
·Impeller |
Ductile cast iron, cast steel and St. steel |
|
·Sealing |
Packing or mechanical seal |
|
·Shaft Sleeve |
Cast Iron |
|
·Seal Ring |
Cast Iron |
PERFORMANCE CURVE
Model Meaning
|
Model |
Speed |
Capacity Q |
Head |
Efficiency |
Power(N)(kW) |
NPSHr |
Weight |
||
|
n(r/min) |
m3/h |
L/S |
H (m) |
η (%) |
Shaft power |
Motor power |
r(m) |
w(Kg) |
|
|
IS50-32-125 ISR50-32-125
|
2900
|
7.5 |
2.08 |
22 |
47 |
0.96 |
1.5 |
2.0 |
32.5 |
|
12.5 |
3.47 |
20 |
60 |
1.13 |
2.0 |
||||
|
15 |
4.17 |
18.5 |
60 |
1.26 |
2.5 |
||||
|
1450 |
3.75 |
1.04 |
5.4 |
43 |
0.13 |
0.55 |
2.0 |
||
|
6.3 |
1.74 |
5 |
54 |
0.16 |
2.0 |
||||
|
7.5 |
2.08 |
4.6 |
55 |
0.17 |
2.5 |
||||
|
IS100-80-160 ISR100-80-160 |
2900 |
60 |
16.7 |
36 |
70 |
8.42 |
15 |
3.5 |
63 |
|
100 |
27.8 |
32 |
78 |
11.17 |
4.0 |
||||
|
120 |
33.3 |
28 |
75 |
12.2 |
5.0 |
||||
|
1450 |
30 |
8.33 |
9.2 |
67 |
1.12 |
2.2 |
2.0 |
||
|
50 |
13.9 |
8.0 |
75 |
1.45 |
2.5 |
||||
|
60 |
16.7 |
6.8 |
71 |
1.57 |
3.5 |
||||
|
IS125-100-315 ISR125-100-315 |
2900 |
120 |
33.3 |
132.5 |
60 |
72.1 |
110 |
4.0 |
178 |
|
200 |
55.6 |
125 |
75 |
90.8 |
4.5 |
||||
|
240 |
66.4 |
120 |
77 |
101.9 |
5.0 |
||||
|
1450 |
60 |
16.7 |
33.5 |
58 |
9.4 |
15 |
2.5 |
||
|
100 |
27.8 |
32 |
73 |
11.9 |
2.5 |
||||
|
120 |
33.3 |
30.5 |
74 |
13.5 |
3.0 |
||||
|
IS200-150-250 ISR200-150-250 |
1450 |
240 |
66.7 |
21.5 |
71 |
19.8 |
37 |
3.5 |
180 |
|
400 |
111.1 |
20 |
82 |
26.58 |
4.3 |
||||
|
460 |
127.8 |
17.5 |
80 |
27.4 |
5.0 |
||||
|
IS250-200-315 ISR250-200-315 |
1480 |
380 |
105.6 |
35.5 |
71 |
51.8 |
75 |
5.5 |
380 |
|
630 |
175 |
32 |
84.5 |
65.0 |
|||||
|
760 |
211.1 |
29 |
84 |
71.5 |
|||||
MIS series single stage end suction centrifugal water pump is designed according to the capability and size stipulated in the international Standard ISO2858, it is composed of pump body, pump cover, impeller, shaft, ring seal, sleeve and suspended bearing units etc.
Pump is for water or liquid similar to water, with high temperature mechanical seal. It also could be used to transfer hot water. The water pump is simple, reliable, small, light, and with good anti-cavitation performance, little power consumption and easy to maintain.
MIS End Suction Water Pump Spare Parts Series
Pump Installation
• Have the pumps’s installation height, the pipeline length and diameter and the flowrate comply with the calculations and try best to reduce unnecessary loss.
• Use a bigger pipeline diameter for a distance transportation. The pump pipeline should have a stand of its own and do not let the pipeline weight upon the pump to avoid it from pressed damage.
• Mount the check value outside of the gate value on the drain-out pipeline if required to mount it.
ABOUT US
Optimisation, Innovation and Excellence, are the three words which most immediately characteristics.
We “Modo Pump” have been offering high end Industrial Centrifugal Pump.Today,we are counted among the key manufacturers, Suppliers and Exporters of kinds of Centrifugal slurry pumps. We have been using high quality raw material in the production sourced from the chief vendors. To cater to the varied necessities of the valuable clients, we have been providing this array of pumps in wide-ranging sizes and specifications. All our products are widely reckoned in the market for durability, performance and working efficiency.
1. What is your product range?
Slurry pumps(Horizontal, vertical, submersible type.)
Water pumps(Multistage, end suction, double suction)
2. What information I need to offer for quotation?
Liquid:___ Pump Capacity___m3/h
PH:_____ Pump Head: ___m
Specific of gravity___ Voltage ___V Frequency ___Hz
3. Do you only supply pumps? Could you supply driven equipment?
Yes, sure ,the pumps could be coupled with motor and diesel engine, below brands for your reference:
Motor: WEG, SIMENS ,ABB, TECO ,and Chinese brands
Diesel engine: Cummins, Deutz, Perkins,Volvo,MITSUBISHI, Caterpiller,MTU,and Chinese brands.
4. What is your MOQ?
We value every client, no matter pump or spare parts, one set or one piece, we treat the same with 100sets.
5. Is OEM parts available ?
Yes, please send me the detailed drawing. Different materials is available.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier