Aflatoxin M1 Rapid Test in milk AFM1 aflatoxin M1 rapid test strips

Description

AFM₁ (Aflatoxin M₁) rapid test strip is convenient, fast, sensitive and can be used for on-site large-scale testing. There are 1 test line and 1 control line on the strip. Mix the milk with the reagent in the micro-well, then incubate at 50℃ for 3 min. Insert the strip into micro-well for 5 min, then read the result by the color of C line (Control Line) and T line (Test Line). No matter whether there is AFM₁ residue in sample, C line will appear, it means the test is valid.

Detection Limit(LOD)

Original milk/pure milk/milk powder: 0.1 ppb (ng/mL)

Operation:

a.  Original milk/pure milk

a1 Read the manual before experiment. Keep the test kit and samples under room temperature. Milk sample should be fully liquid without any quality change, agglomeration or sediment.

a2 Take wells and strips from the bottle and mark numbers on them. (Immediately close the bottle after using it.)

a3 Take 200ul of the milk sample into the micro-well and carefully mix it until the purple particles dissolve and change to pink color. Incubate the wells under 50℃ for 3 min.

a4 Insert the test strips into wells and make sure the sample pad is fully soaked in the milk, for 5 minutes.

a5 Take out the strip and clean the sample pad (either cut off or use paper tower to erase it), then read the result based on C line and T Line.

b.  Milk powder

b1 Take 1g milk powder into 10 mL centrifuge tube, then add 8 mL sterile saline, and mix thoroughly.

b2  Same operation with a1~a5.

Result Determination:

Negative:

T Line (Test Line) and C Line (Control Line) are both red, and color of T Line is deeper than C Line or the same with C Line.

Positive:

C Line is red, T line does not show any color or the color is obviously lighter than C Line. If there is no T Line showing up, we still consider the result as positive.

Invalid:

If C Line does not show up, we consider the test is invalid. Please repeat the test based on our manual.

our advantages:

1. Founded in 2008

2. 200-300 people, 40% technicians

3. 45,000 square meters

4. Quick response rate

5. Same price but better quality and service

Q1: Are you a manufacturer?
Yes, advanced automate machines and professional R&D team ensure the high quality, speedy delivery and large production capacity.
Q2: Can we put our logo/text on the products or package?
Yes, we can do OEM or even ODM. All of our products can be customized.
Q3: Can you provide free samples?
Yes, free samples are available.
Q4: How long is your production time?
Our production time is usually two weeks after receiving the deposit and four weeks for one container order quantity.
Q5: What is the MOQ?
Small quantity like 1 box is available.
Q6: How to make the payment?
By T/T, Western union and Alibaba trade assurance order is also acceptable.