Product Name |
Column Formwork Square Clamp |
Size |
customized |
One Set Include |
4 pcs panels + 4 pcs wedge Pins |
MOQ |
1 set |
Material |
Q355 Steel |
Installation details
1. Whether it is a custom-made square pillar template, or an ordinary template plus a wooden flange splicing square pillar template, the auxiliary bracket can quickly and conveniently clamp the adjacent template when the mold is supported. After the template is quickly fixed, the single-bend adjustable type is directly installed Fastener, it also plays a role in supporting the card board.
2. Using single-bend adjustable fasteners, when installing the first set, the installation operation should be carried out at a vertical distance of 15 cm from the ground, with a tape measure in the early stage, and rely on the auxiliary bracket for rapid installation.
3. Install single-bend adjustable fasteners from bottom to top in sequence, use a tape measure to mark the size of the card board on each side of the column template, and then push it in turn to ensure that each set of fasteners is installed at a horizontal distance.
4. Fasteners are fastened by cutting into the wedge-shaped iron. Therefore, when cutting the wedge-shaped iron with a hammer, the striking force on the 4 pieces of wedge-shaped iron should be uniform, and always observe the 4 pieces of single-bend card board and square column template There should be no gaps in the contact situation.
Packing :
All boards are packed in pallets, inner with polyester bags and outer with carton or plywood, fixed with 12 steel strips tightly.
Strong plastic or carton corners are used to protect all corners of pallets to avoid the damage.
FAQ:
Q1: Do the samples are available?
A: Yes, the sample is free and Express charge would be collected in your side or supply us your Express account no.
Q2. Do you have any MOQ limit ?
A: Yes, our MOQ is 50CBM .
Q3.Are the products tested before shipping?
Yes, we have a professional QC team which follow the production process from the beginning to end.
Production process can be updated everyday upon the customer's request. After production, QC team will check the
cargo piece by piece and test in our lab.Testing report is issued to customers together with QC pictures including size,
thickness, moisture content , edge treatment, package and etc. Loading will be done only after customer's final permission.
Q4. Can the company name and trademark to be printed on the plywood products or package?
As your required. Your company name and trademark can be printed on your plywood products or package.
Q5: Where is your company located?
Our company is located in Linyi city, Shandong province, China.
1.75 hours from Shanghai Pudong International Airport.
2.5 hours from Guangzhou Baiyun International Airport.
Q6. Can I visit your factory to inspect the goods for the order?
Welcome to my company ,and we expect to build long term cooperation with you.
Q7. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay
the balance .