Acrylic Resin Based Performance Enhancing Primer Used On Absorbent Surfaces -PRIMEL 100

PRİMEL 100®

Acrylic Resin Based Performance Enhancing Primer Used On Absorbent Surfaces

APPLICATION FIELD

Used as adherence enhancing primer on walls and ceilings with smooth concrete surface.

APPLICATION


Used as a primer before application of ceramic adhesives, cement-based topcoat plasters and pastes on surfaces that are not resistant to moisture such as gypsum-cardboard plates, gypsum plasters, fiberboard etc.

It is used as a primer for the prevention surface dusting and protection of cement-based applications (plaster, screed).

It is used for applying primer on aerated concrete, plaster and brick surfaces to prevent cracking due to rapid water absorption of surfaces prior to plaster applications.

APPLICATION AND CONSUMPTION

Before application of ceramic adhesives, cement-based topcoat plasters and pastes on surfaces that are not resistant to moisture such as plasterboard, gypsum plasters, fiberboard etc., ;

PRİMEL 100® shall be mixed with water at a ratio of 1/1 for the first coat before application, and it shall be applied directly with a brush for the second coat.

Consumption: Approximately 120 g/m² •

For the prevention surface dusting and protection of cement-based applications (plaster, screed), it shall be applied on the dry surface with a brush by mixing with water with a ratio of 1/3 for the first coat and with water with a ratio of 1/1 for the second coat.

Consumption: Approximately 100 g/m² •

For applying primer on aerated concrete, plaster and brick surfaces to prevent cracking due to rapid water absorption of surfaces prior to plaster applications, it shall be applied with a brush by mixing with water with a ratio of 1/1.

Consumption: Approximately 50 g/m²

PACKAGING AND STORING


• Available in 3 lt. and 10 lt. drums.

• Store in closed space away from direct sunlight. Packages should be protected against frost.

• 1 year from the date of manufacture if stored in unopened original package, under dry, frost free conditions.

• It must use in 3 days after the mixing with water.(Package should be kept tightly closed when not in use)

WARNINGS

* We recommend that the application shall be performed between +5°C and +30 °C.
* The application surface shall be dry, clean and free of dust.
* It shall be protected from freezing.
* All tools used shall be washed with water after application.
* When inhaled, it is harmful to health.
* Keep away from the children.
* Keep it in a container that is closed tightly.
* Avoid contact with eye and skin.
* Contact us for your technical questions and for your questions about all other application conditions.