Special Inquiries: For thicknesses over 6 inches, widths over 60 inches, and non-standard lenghts.
Tolerances
Thickness
Thickness – maximum variation in gauge within a plate ± 0.010 plate to plate variation |
|
Specified thickness, inches |
Tolerance ±, inches |
0.250-0.750 |
0.010 |
0.751-1.250 |
0.017 |
1.251-2.000 |
0.025 |
2.001-3.000 |
0.050 |
3.001-3.250 |
0.065 |
3.251-3.500 |
0.080 |
3.701-4.000 |
0.110 |
4.001-5.000 |
0.125 |
5.001-6.000 |
0.135 |
Width and Length Tolerances
Specified |
Specified width of length, inch |
|||
Up thru 10 |
Over 10 thru 48 |
Over 48 thru 72 |
Over 72 |
|
Tolerances, inch + |
||||
0.250-6.000 |
3/16 |
3/8 |
1/2 |
5/8 |
Flatness Tolerances
Specified |
Deviation from flat*, inch |
|||
In any 1 foot |
In any 6 feet |
|||
Guaranteed |
Typical |
Guaranteed |
Typical |
|
0.250-1.000 |
0.005 |
0.003 |
0.015 |
0.007 |
* Deviations from flat are measured from a straight edge placed on the surface of the plate.
Finish: The side suitable for tooling uses is stencilled. The opposite side is equal or superior to a mill finish.
Packing: Conforms to requirements of carrier through which shipment is made. Both domestic and export packing available.