1. General Description
This specification applies to the 54.6 inch Color TFT-LCD Module P550HVN02.0. This LCD module has a TFT
active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 54.6 inch. This module supports
1,920x1080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical
stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each
dot.
The P550HVN02.0 has been designed to apply the 10-bit 2 channel LVDS interface method. It is intended to
support displays where high brightness, wide viewing angle, high color saturation, and high color depth.
2 General Information
Product Name | AUO P550HVN02.0 Lcd Panel 42 Inch Lcd Screen Module Led TV Display |
Model | P550HVN02.0 |
Size | 55 inch |
Resolution | 1920*1080 |
Brightness | 500nits |
Contrast Ratio | 4000:1 |
View Angle(L/R/U/D) | 89/89/89/89 |
Response Time | 6.5ms |
Optical mode | IPS |
Operating Temperature | 0°-50° |
Storage Temperature | -20°-60° |
Interface | LVDS/8-bit |
Lamp type | LED |
LED Life Time | 60000Hours |
Active Area | 1209.60*680.40mm |
Outline Dimension | 1235.60*706.40*25.70mm |
Driver Element | a-Si TFT active matrix |
Display Colors | 8 bits |
Pixel Pitch | 0.21 (H) x 0.63(W)mm |
Pixel Arrangement | RGB vertical stripe |
Display Operation Mode | Normally Black |
Surface Treatment | Anti-Glare, 3H |
Rotate Function | Unachievable |
Display Orientation | Portrait/Landscape Enabled |
Authentication | ROSH/UL |
Note: (1)Dmax: 25.5mm (Front bezel to Driver cover); Dmin: 9.9mm (Front bezel to Bezel back)
3 DC Characteristics (Ta = 25±2℃)
Parameter | Symbol | Value | Unit | Note | |||
Min | Typ | Max | |||||
LCD | |||||||
Power Supply Input Voltage | VDD | 10.8 | 12 | 13.2 | VDC | - | |
Power Supply Input Current | IDD | - | 0.9 | 1.08 | A | 1 | |
Power Consumption | PC | - | 10.8 | 12.96 | W | ||
Inrush Current | IRUSH | - | - | 5.5 | A | 2 | |
Permissible Ripple of Power Supply Input Voltage | |VID| | - | - | VDD * 5% | mVpk-pk | 3 | |
CMOS Interface | Input Differential Voltage | VIH | 200 | 400 | 600 | mVDC | 4 |
Differential Input High Threshold Voltage | VIL | +100 | - | +300 | mVDC | ||
Differential Input Low Threshold Voltage | VTL | -300 | - | -100 | mVDC | ||
Input Common Mode Voltage | VICM | 1.1 | 1.25 | 1.4 | VDC | ||
CMOS Interface | Input High Threshold Voltage | VIH | 2.7 | - | 3.3 | mVDC | |
Input Low Threshold Voltage | VIL | - | - | 0.6 | mVDC | ||
Backlight Power Consumptio | PBL | 96.5 | 105.6 | PBL | |||
Life time (MTTF) | - | 50000 | 60000 | - | Hour | 8,9 |
4 Input Pin Assignment
Pin | Symbol | Description |
1 | VDDB | Operating Voltage Supply, +24V DC regulated |
2 | VDDB | Operating Voltage Supply, +24V DC regulated |
3 | VDDB | Operating Voltage Supply, +24V DC regulated |
4 | VDDB | Operating Voltage Supply, +24V DC regulated |
5 | VDDB | Operating Voltage Supply, +24V DC regulated |
6 | BLGND | Ground and Current Return |
7 | BLGND | Ground and Current Return |
8 | BLGND | Ground and Current Return |
9 | BLGND | Ground and Current Return |
10 | BLGND | Ground and Current Return |
11 | DET | BLU status detection: Normal : 0~0.8V ; Abnormal : Open collector |
12 | VBLON | BLU On-Off control: BL On : High/Open (2V~3.3V); BL off : Low (0~0.8V/GND) |
13 | NC | NC |
14 | PDIM | External PWM (10%~100% Duty, open for 100%) < NC ; at Internal PWM mode> |
IF External PWM function less than 5% dimming ratio, Judge condition as below:
(1)Backlight module must be lighted ON normally.
(2)All protection function must work normally.
(3)Uniformity and flicker could not be guaranteed
4 Front View
7 Back View