ATMARS Laboratory Test Equipment Explosion Proof Desiccator Drying Large Vacuum Oven
What is an Explosion Proof Oven ?
Match with an Explosion Resistant Vent and an Explosion Resistant Door, Explosion Proof Ovens from ATMARS are designed for safe heat treatment and drying processes of materials with high solvent content in indutries such as aerospace, chemical, paint and basic materials for Curing, Drying, Aging, and other Laboratory use.
Our Experienced Sales Engineers can help you decide which oven is right for your application.
Performance
Workspace volume: 90L
Workspace dimensions: W450xD450xH450mm OR can be customized according to specimen sizes and your testing requirements.
Temperature range: RT+20℃ to +200℃
Temperature fluctuation: ±0.3℃(RT to +100℃); ±0.4℃(+101℃ to +200℃)
Temperature uniformity: ≤±1.0℃ (RT to +100℃); ≤±1.5℃ (+101 to +200℃)
Temperature deviation: ≤±2.0℃
Heating-up time: from +25℃ to +200℃ in 40min., average temperature change rate
| Specifications of AOE-90A - Explosion Resistant Oven / High Temperature Chamber, Maxiumum Temperature: +200℃ *Performance is based on ambient temperature +20 ℃, empty load no specimen. |
||
| Model | AOE-90A | |
| Performance | Temperature range | (RT+20℃) to +200℃ |
| Temperature fluctuation | ±0.3℃(RT to +100℃); ±0.4℃(+101℃ to +200℃) |
|
| Temperature deviation | ≤±2.0℃ | |
| Temperature uniformity | ≤±1.0℃ (RT to +100℃); ≤±1.5℃ (+101 to +200℃) |
|
| Heat-up time | From +25℃ to +200℃ in 40min., average temperature change rate | |
| Temperature overshoot | ≤±2.0℃ | |
| Workspace volume | About 90L | |
| Workspace dimensions | W450mm × H450mm × D450mm | |
| Exterior dimensions | Approx. W850mm × H1150mm × D650mm | |
| Material | Interior | Stainless steel (SUS304) |
| Exterior | Cold-rolled steel with powder coated surface | |
| Seal | Imported silicone seal | |
| Insulation | 100mm Mineral wool | |
| System | Heating | Nichrome resistance wire heater |
| Airflow | Vertical-type | |
| Explosion Resistant Door | Stainless steel chains are added to the lock position and hinge position of the door frame to ensure that even if the door is bounced off, the cushioning effect will reach 12 MPa. | |
| Explosion Resistant Vent | When the test sample exploded, the internal air pressure is too large, the explosion-proof valve will automatically open. The safety vent releases the sudden increase in pressure inside due to explosion with explosion-proof exhaust pipe, protective wire net, insulated sleeve and external metal plate. |
|
| Power requirement | About 3.0KW | |
| Noise level | ≤65dB (A-weighted sound pressure level measured at a distance of 1.0 meter) |
|
| Allowable ambient conditions | Temperature: +5℃ to +35℃; Relative humidity: ≤85%RH (No condensation); Air pressure: 86kPa to 106kPa |
|
| Electrical supply | AC 220 (1±10%)V (50±0.5)Hz Single Phase 2 Wire plus Earth Wire | |
| Custom options available | ||
- Pl
FAQ
1. Are your company a factory or a trading company ?
-- We are a manufacturer, factory + trading company
2. What are the payment methods?
- Payment methods are T/T, Paypal, LC, VISA
3. Do you accept customization service? Can I have my logo on the machine?
--Yes, of course. We can not only offer standard machines, but also customized.
4. How do you calibrate the equipment?
--We have our own calibration and third-party calibration such as ISO17025.
5. What's the delivery term?
--At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 7-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
6. What about the services and product' quality?
-Service: ,Design service ,Buyer service.
Quality: Each instruments must be carried out 100% quality examination and test, the finished products must through a third party calibration institutions before shipping and delivery goods.
7. Can we come to your factory to study and train?
- Welcome to our factory for study and training, we provide this service free of charge.
8. Do you have an agent?
- Currently we have agents in Europe, Asia, North America, South Africa, and can provide sales and technical services.
9. How to provide after sales service?
- At first, our test chambers are produced based on 20 years product lifetime. Normally once test chambers have problems, we judge the problems, and send spare parts to our customers, and teach them how to change new parts on by email or video. Within 3 years, all spare parts and shipping cost (by DHL, INT, and FedEx) paid by our company.
- If customers need our engineers on site service, the company only need pay the ticket accommodation to our engineers, service is for free.
- If Products still can't use after our engineers repair, we will produce 2 new test chamber (same as the old one) to our customers with no charge.
- You can contact our local service center in overseas market to get service and product.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier