ATE-2 LED driver automatic test system is applied to the production line for the finished products testing. With features of simplified operation and nice-looking, the workers can operate it at very short time. This system can meet the requirements of IEC62384, GB24825-2009 and other relative standards.
Characteristics:
•This system includes 2 groups (left and right); the 2 groups can work in turn, so that to improve the work efficiency. For example, if the left is on working, then the right can make wire connection.
•It can test 4 LED drivers input and output at one time.
•The equipment can connect with electronic load and LED load, the two difference loads can be fast switch under the control of computer.
•Enable to print out the series number and parameters of sub-quality products by working with a micro-printer,
•Enable to achieve the bar-code record function by working with a bar-code scanner.
•The test report can be saved as Excel file for consult, statistic and analysis purpose.
•Good software interface to freely choose the difference parameters combination, so that to meet different demands. All the parameters can set limit, and with the quality analysis function.
Specifications:
Item | Test Range | Tolerance | Test Condition |
Voltage | AC: 3~300V (CF=1.67) | ±(0.1%reading+0.1%range+1digit) | 45~65Hz sine-wave Calibration validity: 12 months |
DC: 3~500V | |||
Current | AC: 5mA~2.7A (CF=3) | ||
DC: 5mA~8A | |||
Power | AC: 0.015~800W | ||
DC: 0.015~4000W | |||
Power Factor | 0.000~1.000 | ±(0.002+0.001/reading+1digit) | |
Frequency | 45Hz~65Hz | ±0.1% Reading | |
Harmonic | Total harmonic, and 2-11 times harmonic component | ±(0.1% range+5% Reading) | |
Surge Current | 50mA~100A | ±(0.5% range+0.5% range+1digit) | Square wave with pulse width greater than 10μs Calibration validity: 12months |
Lamp Voltage | AC: 3~300V (CF=1.67) | ±(0.1%reading+0.1%range+1digit) | 45~65Hz sine-wave Calibration validity: 12moths |
DC: 3~500V | |||
Lamp Current | AC: 5mA~2.7A (CF=3) | ||
DC: 5mA~8A | |||
Lamp Power | AC: 0.015~800W | ||
DC: 0.015~4000W | |||
Ripple Current | Max: 5mA~8A | ±(1%reading+1%range) | 20-70kHz sine-wave |
Lisun Electronics Inc was found by Lisun Group in 2003. We have sales & service offices in Shanghai, Russia, India and Korea. In 2012, we built a high level products show room & lab center in Shanghai. Lisun Group has set up a new manufactory in China to research and develop the world high-technology CFL & LED Test Instruments. Its quality system has been strictly certified by ISO9001:2008. The Lisun Group products have been authenticated by the third party lab and were awarded by CE certificate. As a CIE Supportive Member, all of the test instruments produced by Lisun Group are designed according to CIE Standards.
Our main products are Goniophotometer, Spectroradiometer, Integrating Sphere, LED Test Instruments, CFL Test Instruments, Photometer and Colorimeter, EMC & EMI Testing,Electronic Ballast Tester, Electrical Safety Testing, Environmental Test Chamber, Plug and Switch Testing, AC and DC Power Supply and etc.
Lisun Group’s products have been sold to more than 120 countries and regions all over the world. It’s quality is well accepted by many world famous companies such as UL, SGS, NIST, NIM, UNDP, Philips, OSRAM and so on. Lisun Group wins thousands of customers’ trust with motto “Right Product, Right Price and Right Service”. We will continue presenting more and more high quality products to our customers in future.