ASME 300L vodka whisky still distillation copper destilador alcohol distiller distillery equipment vodka making machine
300liters alcohol distillation equipment design for high proof spirits vodka & gin 96%abv
Still Pot | SS304 made with ex-proof agitator | ||||
300l / 450l total capacity | 21KW electric water bath | 15-30kg/h steam heating | |||
Helmet | copper made | ||||
Gin basket | sieve basket hang type | ||||
Distillation column | 4+12 copper bubble plates | ||||
Condenser column | Copper & SS304 made | ||||
Supporting base | water and product tank made as support base | ||||
A brief introduction of distillery equipment
We are a still maker from China. We don't profess to know much about owning a distillery, but we can make equipment for you and your needs.We offer a still that can give you the full flavor and sulphide reduction properties only a copper still can offer.Our "modular" columns can be configured to allow you to make a full bodied earthy rum in the morning and make a high quality gin in a single pass in the afternoon. Below are our standard Models. If you have a specific idea on how a product should be made, then maybe you might want to have a chat...We are embracing new ideas all the time.
We can also customerize the distillery according to your demand.
Below are the four(4) standard distiller Models we usually make.
Model | Design | Usage |
DYE I | POT HELMET COLUMN (short or high) DEPHLEGMATOR CONDENSER | Design for 70-90%abv low proof spirits whisky, brandy, rum, tequila |
DYE II | POT HELMET COLUMN (short or high) DEPHLEGMATOR GIN BASKET CONDENSER | Compared with DYE-I with one more gin basket Could distilling gin with netural spirits Design for 70-90%abv spice spirits gin, whisky, brandy, rum, tequila |
DYE III | POT HELMET 1st COLUMN (short) 2nd COLUMN (high) DEPHLEGMATOR GIN BASKET CONDENSER | Compared with DYE-II with one more high column Could distilling gin with netural spirits Could distilling low proof spirits with short column Design for 96%abv for vodka and gin vodka, gin, whisky, brandy, rum, tequila |
DYE IV | POT HELMET 1st COLUMN (short) 2nd COLUMN (short or high) DEPHLEGMATOR CONDENSER | Compared with DYE-III remove gin basket Could distilling low proof spirits with short column Design for 96%abv for vodka vodka, whisky, brandy, rum, tequila |
Two kinds of shipment: by LCL or 20/40/45 Feet container
Pre-Sales Service
2. We can provide company's qualification certification and the drawings.
3. We can also make customized products according to customer's needs.
After-Sales Service
2. Owing to the quotation of our equipment is FOB price which excluded charges of door-to-door service. Thus, if necessary, we can appoint our technician to debug the machine with air ticket, visa, accommodation and labor cost provided by your party. Or you can send your technician to our company to learn techniques.
3. Meanwhile, you can call or e-mail to consult any relevant questions since we have a special line of after-sale service. Or you can communicate online and solve the problems.
Which is better and more productive – a Reflux Still or a Pot Still?
Both types of Still will remove the alcohol from a wash or mash, therefore the productivity is basically the same.
A Reflux Still refines the distillate to a high degree, producing a distillate of very high alcohol content with very little of the 'character' of the wash or mash coming through. A Reflux Still is a must for producing neutral spirit or Vodka.
A Pot Still produces a distillate with much lower alcohol content but with a correspondingly increased level of the 'character' coming through. This is important for distilleries producing Spirits such as Whisky, Tequila and Rum etc. where the character of the base ingredients is required in the final product.
Why do I need coppper?
Copper provides an essential chemical reaction, especially at lower proofs, that removes sulfides while the alcohol is in vapor form.
Copper has the ability to react with many sulfide compounds, such as sulfides or mercaptans, which are normally present in fermented mash, making them insoluble and removing them from the high wine vapor. As this chemical reaction proceeds within the still, a bright copper surface becomes very dark in color. For continuation of effective scavenging, it is necessary periodically to clean the still to remove these black deposits.
How much copper is really needed?
a. Copper provides an essential chemical reaction, especially at lower proofs, that removes sulfides while the alcohol is in vapor form.
b. Our systems are designed to give you the needed amount of copper for any distilled product. We can always add more copper to your system for a premium,if you require it.
Do I need Permits?
a. Yes there are many permits required to start a new distillery depending on where you are located. Besides the federal permitting with the Alcohol and Tobacco Tax and Trade Bureau (TTB), most states and local jurisdictions require permitting of some sort. Please consult with an industry consultant or your legal counsel.
Will someone from DYE train me on how to operate the equipment?
Because we specialize in equipment design and manufacturing, we recommend contacting a consultant regarding your particular product line. While we offer general guidelines, a consultant will be able to offer a more specific set of instructions, often tailored to the product(s) you plan on producing.
If you have no available consultant,please feel free to contact us and we will recommend you one.
Lucy Wu
Cel:+86-18966255850
Tel:+86-577-86807618
Whatsapp:+86-18966255850
NOTE: You can add Facebook group"DYE distilling and brewing Platform" to see more updates of our brewing or distilling equipments.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier