Welcome to TradeChina
APT310 Small Diameter Muddy Liquid Level Measuring Meter or Transmitter
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meo Textile Clothing Co.LTD
China - Hangzhou
Manufacturer
Trade Capacity
Export Percentage
Nearest Port
shanghai,ningbo
Accepted Delivery Terms
Employees
101-200 people
Accepted Payment Currency
USD,CNY
Average Lead Time
60 Day(s)
Certifications
Product Specifications
--Product Description
APT310 Small Diameter Muddy Liquid Level Measuring Meter or Transmitter
Product Description
APT310 level transmitter has the special structure and applications. It has high accuracy, small volume,stability,plus resistance to abrasion,oil,acid&alkali and high intensity gas lead cable ensured that it can meet the different occasions measurement requirements. It is widely used in sewage, river and lakes treatment as well as channel, large rivers, l reservoirs and coastline monitoring.This product has got intrinsic safety certification,explosion proof certification and CE certification.The lead of two-wire circumfluent is no-polarity.
Features
*316L stainless steel diaphragm
*MEAS TE pressure cell,0.25% F.S,0.5%FS
*Diameter length only Ø19 mm
*Level ranges from 50cm to 600m
*Strong anti-interference ,long-term stability
*IP68 full sealed plastic waterproof design
*Wide range,available to Gauge,Absolute and sealed gauge type
*-35°C~125 °C Wide working temp scope
*Long time working at low temperate -30°C
*EMI/RFI Rejection
*Over voltage ,Reverse Polarity and short circuit protection
*Customers can customize PU,PE or PTFE cable lengths
Best Selling
Detailed Images
Characteristic of APT300 Series Pressure Sensor | ||||||||
1 | Germany technology Ceramic sensors, 10 years design | |||||||
2 | Ti special integrated processing chip is used in the circuit | |||||||
3 | Automatic temperature compensation -40~80 | |||||||
4 | Superior Long term Stability,low temperature drift, high sensitivity | |||||||
5 | Multiple electrical connection are optional ,easy installation | |||||||
7 | Wide range,available to Gauge,Absolute and sealed gauge type | |||||||
8 | HVAC Systems ·Energy and Water Treatment | |||||||
9 | EMI/RFI Rejection | |||||||
Size Information
Dimension Unit of outline drawing:mm.
Electrionic Connections
Manufacture Specification
Ambient Temperature: 25°C (unless specified)
Parameter | Data | ||||||||||||
Pressure Range | 0~0.01....10MPa / 0-0.5M.......500mH2O | ||||||||||||
Pressure type | gauge (G), absolute (A) | ||||||||||||
Overpressure | 200%FS | ||||||||||||
Burst pressure | 300%FS | ||||||||||||
Electronic Wire | 2 Wires | 3 Wires | |||||||||||
Output signal | 4~20mA | 0~5VDC | 1~5VDC | 0~10VDC | 0.5~4.5VDC | 0.5~4.5 V radio metric | RS485 Modbus RTU | ||||||
Power Supply | 12 ~ 30VDC, typical value: 24VDC | 10~30 VDC | 10~30VDC | 12~30VDC | 5 V DC | 5 V DC±5% | 10-30VDC╱ 3-5VDC | ||||||
Accuracy (including: nonlinearity, repeatability, hysteresis, zero drift, full drift) | ≤0.1%FS ≤0.15% ≤0.2%FS ≤0.25%FS(typ.) ≤0.5%FS(max.) | ||||||||||||
Long-term stability | ≤0.2%FS/year | ||||||||||||
Working Temp | −25℃~85℃ −40℃~100℃(Customized) | ||||||||||||
Storage Temp | −40℃~125℃ | ||||||||||||
Temperature Compensation | -10℃~80℃ (Standard) | ||||||||||||
Temp.coefficient of zero | ±0.1%FS/°C | ||||||||||||
Temp.coefficient of span | ±0.05%FS/°C | ||||||||||||
Insulating resistance | 100MΩ@250VDC | ||||||||||||
Medium compatible | Water or Compatible with 316L Stainless Steel | ||||||||||||
Short circuit protected | Yes | ||||||||||||
Reverse polarity protection | Yes | ||||||||||||
Electronic connection | Fixed cable and water proof IP68 | ||||||||||||
Pressure interface | Gage pressure; Sealed gage and absolute opional | ||||||||||||
Material of pressure membrane | 316L stainless steel | ||||||||||||
Response time(10%~90%) | ≤10msec(Rises to 90%FS) | ||||||||||||
Vibration Shock | 10g/5~2kHz，axes X/Y/Z/20g half sine 11ms | ||||||||||||
Water Proof | IP68 | ||||||||||||
Cable optional | PE cable( Water proof ); PUR cable( Oil Proof ); PTFE Cable( Anti-Corrosive) | ||||||||||||
Certificate approving | CE Certificate available. | ||||||||||||
EMC Standard | EN 61326-1:2013; EN 61326-2-3:2013 EN 61000-6-2:2005; EN61000-6-4:2007+A1 | ||||||||||||
Weight | Net weight is about 0.35KG, Full Packing weight is about 1.0KG (Included 2 Meters Cable) | ||||||||||||
Schematic diagram of common installation method
Application
1.deep well level measurement 2.hydraulic monitoring in rivers and sea
3.sewage treatment
4.muddy liquid level measurement
4.muddy liquid level measurement
5.liquid reservoir level measurement
6.water saving irrigationg
7.water diversion project
7.water diversion project
Company Introduction
Points to note
1.The measuring medium must be compatible with 304 stainless steel and nitrile rubber.
2.If possible, the electrical connection of the pressure transmitter should be as vertical as possible. Measurement of dry gas pressure except indoors and in dry conditions;
3.When the pressure vessel being measured has a water or Air Hammer, a buffer valve must be installed at the front of the pressure transmitter interface.
4.When used to measure the pressure of the outlet of a pressure pump, a buffer valve or a buffer bend must be added at the front end of the pressure transmitter.
5.When a pressure transmitter is installed in the pipeline, the first step is to clean up the liquid at the threaded port and install the pressure transmitter. The second step is to slowly open the valve after installation to prevent pressure impact.
6.When a pressure transmitter is mounted on a turn pipe, it should be at least 9 times the diameter of the pipe at the turn and preferably downstream of the turn flow.
7.When a motor is present in the measuring system, ensure that the motor housing and the housing of the power supply for the pressure transmitter are at the same potential and that the resistance between the housing and the Earth does not exceed 9;
8.When there is a transducer in the measuring system, the shell of the motor controlled by the transducer should be connected to the ground wire of the power supply of the pressure transmitter.
9.When the pressure hole of the pressure transmitter is blocked, it is forbidden to use the sharp device to dredge the pressure hole.
10.The pressure transmitter should be dismounted and the part of the pressure hole should be immersed into the liquid that can dissolve the blocked material. If the user needs to calibrate zero or calibration full range should be under the guidance of our technical people, do not open the transmitter to adjust;
11.The pressure transmitter should be installed in a position that is not vulnerable to collision and trampling;
12.Transmission Cables for pressure transmitters shall not be placed in the same threading tube or in the same wiring groove as other high-voltage or high-voltage cables;
13.When installing pressure transmitters in the Dorey area, be sure to install lightning protection devices and ensure that the pressure transmitters and power supply are reliably connected to the ear;
FAQ
Q:Can you accept ODM & OEM service ?
A:We professional provide OEM &ODM service for all of items.
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO,CE and ROSH,we could send the certification test of our company to you.
Q:How is the price?
A:As we believe the quality is the most important,we will provide the best quality ultrasonic level sensor we can with reasonable
price.
Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us and we will try our best to satisfy you.
Q: How can I get my sensors?/ What's the means of transport?
A. We main delivery goods by express: DHL, FedEx, UPS,TNT, etc or logistics by indicator
Q. How to order ?
A. In order to recommend you the most suitable radar level sensors and make an accurate quotation, please provide the following information and send it to our sales when you are going to make an inquiry, thanks !
1. What is your medium? Water, oil or others?
2. Level range: 0-10meters, or others?
3. Output signal: 4-20mA, RS485 or others?
A:We professional provide OEM &ODM service for all of items.
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO,CE and ROSH,we could send the certification test of our company to you.
Q:How is the price?
A:As we believe the quality is the most important,we will provide the best quality ultrasonic level sensor we can with reasonable
price.
Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us and we will try our best to satisfy you.
Q: How can I get my sensors?/ What's the means of transport?
A. We main delivery goods by express: DHL, FedEx, UPS,TNT, etc or logistics by indicator
Q. How to order ?
A. In order to recommend you the most suitable radar level sensors and make an accurate quotation, please provide the following information and send it to our sales when you are going to make an inquiry, thanks !
1. What is your medium? Water, oil or others?
2. Level range: 0-10meters, or others?
3. Output signal: 4-20mA, RS485 or others?
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier