API Oil well drilling PDM drill/screw drill tools/downhole mud motor
Drilling Down Hole Motor/Screw Drill/Mud Motor for Oil Well Down hole Drilling Tool
Downhole Motor for oil well downhole tool
Downhole motor description:
Down-hole motor is a kind of downhole drilling tool powered by mud. The mud from mud pump enters motor by way of bypass valve, and a pressure drop between motor inlet and outlet created, such pressure drop will drive the motor rotator to rotate, and transmit the torque and rotary speed to bit by universal shaft and transmission shaft. The downhole motor property mainly depends upon its property parameters. This product uses the high and new technology of coating to avoid coating off of rotors resulted from the traditional technology. Its strength and life are greatly improved. It is applicable to directional drilling horizontal drilling, composite drilling, cluster wells, sidetrack wells and well workover etc.
Specifications We can produce series of downhole motors in different sizes, as Φ57(21/4"),Φ73(23/4"),Φ89(31/2"),Φ95(33/4"),Φ120(43/4"),Φ127(5"),Φ165(61/2"),Φ172(63/4"),Φ178(7"),Φ185(71/4"),Φ197(73/4"),Φ203(8"),Φ216(81/2"),Φ244(95/8"), etc.
A Variof Types &ety the Capabilities In accordance with the actual drilling needs, we push out high, midiem and low speed downhole motors, of a variety of types with different functional configuration and application for all working conditions.
1. Standard type Standard motor, mud lubricating transmission shaft, straight, single and double bent.
2. Long type The torque is increased by 30%to 60%than standard ones, mud lubricating transmission shaft, straight, single and double bent.
3. High flow rate type The adoption of hollow rotor and different sizes of hard alloy jet nozzle to increase the incoming flow and bit power.
4.High deflection type The unique structure design makes the overall length shorter and bent housing closer to the bit, deflection rate reach up to 1/m, so as to keep good working conditions.
5. High temperature resistance type The motor stator is made of superior quality high temperature resistant rubber, which enables the motor to perform stably in the well bottom at max. 175 C.
6. Oil-stransmission shaft type ealed It improves the working condition of thrust bearing and radial bearing, and increases the life span of each single trip.
7. Bend angle adjustable type We equip the motors with adjustable bend housing in different types and sizes, and through which before dropping we can adjust the bend angle.
8. Saturated saltwater mud resistance type The special coating on the rotor with strong ability of anti-corrosion and wear-resistance enables the motor to work stably for a long time in the condition of saturated saltwater mud.
9. Impact Resistance Type We adopt a series of shock absorbers to lighten or eliminate bit jumping and impact shock occurring in drilling, protect the drilling tools avoiding damage, increase service life and ensure the drilling safe and efficient. ( style impact resistance downhole motor is our new technology patent products. Patent No ZL2011 2 0000193.2)
Model | Flow Rate | Pressure Drop | Rating Torque | Max.Torque | Bit Weight | Power | OD | Length | Connections | ||
(l/s) | (Mpa) | (N`m) | (N•m) | (kn) | (Kw) | (mm) | (m) | (API REG) | |||
Box up | box down | ||||||||||
5LZ43×7.0 | 0.5~1.5 | 108 | 173 | 6 | 3.68 | 43(11/16) | 3.3 | M27*2 | |||
5LZ60×7.0 | 1.26~3.13 | 2.5 | 160 | 280 | 5 | 2.35~6.03 | 60(23/8) | 3.3 | 1.9TBG | ||
5LZ73×7.0 | 1.26~5.05 | 3.5 | 275 | 480 | 12 | 3.5~13.82 | 73(27/8) | 3.45 | 23/8 TBG | 23/8 REG | |
5LZ89×7.0 | 2~7 | 4.1 | 560 | 980 | 18 | 5.6~19.35 | 89(31/2) | 4.67 | 23/8 REG | ||
5LZ95×7.0 | 4.73~11.04 | 3.2 | 950 | 1240 | 21 | 10.4~23.79 | 95(33/4) | 3.7 | 27/8 REG | ||
C5LZ95×7.0 | 5~13.33 | 6.5 | 1490 | 2384 | 55 | 21.8~59.3 | 95(33/4) | 6.88 | 27/8 REG | ||
5LZ100×7.0 | 4.73~11 | 3.2 | 710 | 1240 | 21 | 10.4~23.79 | 100(37/8) | 4.35 | 27/8 REG | ||
5LZ120×7.0 | 5.78~15.8 | 2.5 | 1300 | 2275 | 55 | 9.5~27.23 | 120(43/4) | 4.88 | 31/2 REG | ||
C5LZ120×7.0 | 6.667~20 | 5.2 | 2500 | 4000 | 55 | 70.5 | 120(43/4) | 6.88 | 31/2 REG | ||
D5LZ120×7.0 | 5.78~15.8 | 1.6 | 900 | 1440 | 55 | 6.6~18.85 | 120(43/4) | 3.29 | 31/2 REG | ||
3LZ165×7.0 | 17~27 | 4.1 | 2500 | 3750 | 80 | 78.54 | 165(61/2) | 6.5 | 41/2 REG | ||
5LZ165×7.0 | 16~28(47) | 3.2 | 3200 | 5600 | 80 | 33.5~59.65 | 165(61/2) | 6.25 | 41/2 REG | ||
D7LZ165×7.0 | 18~28 | 2.5 | 2300 | 3680 | 80 | 30.4~47.2 | 165(61/2) | 4.7 | 41/2 REG | ||
9LZ165×7.0 | 19~31.6 | 2.5 | 3200 | 5600 | 100 | 45.24 | 165(61/2) | 5.7 | 41/2 REG |
Downhole screw motor
Why you need to choose Sino Petro?
As a professional oil and gas service company, Sino Petro has many good experience in selling and serves for the oilfield industries for years. Quality is the culture of the company, we provide API and BV certified products for customer.
Can you make us the best quality products as well as a good price?
Yes, we can give you really high quality products with competitive price. We have a better understanding in Chinese market, with us yourmoney will be safe.
What is special compare with other companies?
First, we provide the quality products, with BV and API certified; At the same time, we provide our customer with the best service after sale, any time any where.
Sino Petro company is a professional well head manufacturer and supplier of various oilfield equipment, which has API 6A,ISO9001,14001,OHSAS 18001 , so on . Main products include oil drilling and service equipment,oil production equipment,OCTG ,wellhead gate, Christmas tree, kill and chock manifold & downhole tools and spare parts with API certification. our products have already been exported to USA, South America, Africa, Middle East, Russia and some other countries (regions). Sino Petro company has become VIP (assigned) supplier and built strategic partnership with some coutries' national petroleum companies.
Contaction information :
Whatsapp / Wechat : +86 13864720161 / +86 13287323725