Application:
The hose for well contro. high-pressure, fire-resistant and heat-insulation hose assembly is mainly used for the hydraulic control of the BOP for drilling and for hydraulic transmission at high-temperature and flammable places in the metallurgic industry.
Classificatioin:
high molecular polymer jacket type, stainless stell armored jacket type and braided stainless steel wire jacket type.
Pressure:
5,000psi W.P. – 10,000 psi Test-15,000 Minimum Burst
Tube:
Modified Nitrile. Black.
Reinforcement:
Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.
Cover:
Fire resistant, rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.
Couplings:
Crimped couplings with over-ferrule fire protection. Temperature: -40°F to +212°F (-40°C to +100°C) continuous service.
Standard:
API 16D SY/T5023.2-2002
Nominal ID(mm) | 19-38 mm |
OD of hose assembly | 44-69 mm |
Min operating pressure range | 35-70 MPa |
Min burst pressure range | 105-175 MPa |
Min.bending radius | 280-560 mm |
Thread | NPT LP |
Operating time with fire-resisting at 750℃ | 5-25 min |
Test: Each hose will be allowed to deliver out from factory while pass the working and testing pressure successfully only.
Lake Petro company is a professional supplier of various oilfield equipment, including oil drilling and service equipment,oil production equipment,OCTG ,wellhead & downhole tools and spare parts with API certification. our products have already been exported to USA, South America, Africa, Middle East, Russia and some other countries (regions). Lake Petro company has become VIP (assigned) supplier and built strategic partnership with some coutries' national petroleum companies.
How can I place order?
A: You can contact us by email about your order details, or place order on line.
How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank), Western Union are the most usual ways we are using.
What’s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don’t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.