Fireproofing Intumescent Paint, Water based!! 

Resistant up to 120 minutes for Steel, Concrete and Wooden Structures. This water based fireproofing paint provides protection against fire for up to 120 minutes. The paint is intumescent and expands to provide insulation against fire. The paint is brushed on to the surface, where is cures to form an uninterrupted layer. The paint is flame retardant and when in contact with flame, expands due to a chemical reaction, preventing the surface from reaching the critical temperature. The paint also allows for the permeability of water vapour. Thanks to this quality, the surface upon which the paint is applied is able to breathe. The paint may be used on wood, concrete, prefabricated and steel structures to great effect.

TECHNICAL SPECIFICATIONS;

•Colour: White or any other requested colour •Density: 1,15±0,05 kg/lt •Solid Matter (by weight): 60% ± 2% •PH: 7-9 •Curing Time: 6 hours •Application Temperature: + 5 °C or more •Tensile Strength: 2 N/mm at 23°C •Fireproofing Characteristics: Compliance to TS 13501-1/January 2010 Table 1B, Conditions S1d0 according to experiment and examination report TS ISO 11925-2 dated 02.2012 no. 139921, performed according to standard TS EN 13823:March 2010 According to the laboratory test results of the Turkish Standards Institute Experiment and Calibration Centre: Compliance of sample tested to EN 13501-1B (European Standard) when in contact with flame: Passed When samples where tested according to TS EN ISO 11925-2; •The sample did not catch fire •The flames did not reach the 150 mm measurement line during the experiment •The sample did not drip •The filter paper did not burn •The experimental sample melted somewhat •The lateral flame did not spread down the lonfer axis •Fiery particles or droplets f<10s and f>10s were not observed •Smoke from the sample did not disperse into the room •The experiment was not ended early •The sample did not distort or collapse.

SUMMARY OF TSE TEST RESULTS: •Averagea FIGRA value (W/s): 17.24 •Average THR600s (MJ): 0.93 •Average SMORA value (m²/s² ): 10.58 •Average TSP600s (m²): 51,86 •LFS spread to the edge (mm): Not observed •Burning droplets/particles <_10s: Not observed •Burning droplets/ particles <_10s: Not observed Conclusion: ISONEM ANTI FIRE PAINT PLUS complies to TS 13501-1/January 2010 Table 1B, Conditions S1d0 according to experiment and examination report TS ISO 11925-2 dated 02.2012 no. 139921, performed according to standard TS EN 13823:March 2010 Surface Preparation: Before application, all surfaces must be clean and dry, cleansed of oil, dirt, mud and other similar substances. Before use, open the packaging and stir to ensure homogeneity.

CE Certificate
ISO Certificate

Color Scheme (Color Tones may vary due to resolution and light differences)

5 CONTINENTS, IN NEARLY 100 COUNTRIES,

ISONEM PAINTS AND INSULATION TECHNOLOGIES INC. was established in Izmir in 2004.It has assumed the leading role with the innovations it has brought up to the sector with its research and development (R & D) team, each of which is specialized in his/her branch at a 7500 m2 closed modern production site landed on an area of 10000 m2 within ITOB Organized Industrial Zone. We have presented the innovative products for defence, energy, agriculture and industrial field and the thermal, sound, fire, water insulation and special chemical products that we have developed to the usage of the mankind and the whole world.

We have managed to have our name echoed via both domestic and foreign successes that we have achieved by adopting sustainable quality as a  principle within every stage by using high technology since the beginnings of our organization.

We have achieved to be a Turkish Company and Trade Mark through our activities in Europe, Africa and Far East which is known well by the whole world in its field by executing exports to approximately 100 countries, basically China, Korea and USA.

Besides our commercial and sectorial success, we have been aware of the fact that today’s world is entrusted to us for the mankind of tomorrows, since we have never used biocidal raw materials within our products as an outcome of our awareness for the environment.

As Isonem, our mission is protecting the nature via electricity generating external housepaints, paints which convert CO2 into Oxygen and many innovative products; and to present a better world worth living.