Multiple controls
Test range: | 0-300g/Nm3 | 0-200g/Nm3 | 0-150g/Nm3 | ||
0-50g/Nm3 | 0-1000ppm | 0-100ppm | |||
Display resolution: | 0.01g/m 0.01ppm remark:1mg/L=1g/m3=467ppm | ||||
Display unit: | g/Nm3 mg/NL %WT ppm mg/Nm3 | ||||
Sampling Method: | active pressure sampling pumping sampling | ||||
Content Interface: | ozone concentration temperature compensation | ||||
pressure compensation Mass flow & output display | |||||
Light Source Life: | About 10000 hours | ||||
Display Interface: | 4.3 inch touch screen operation interface | ||||
Auxiliary Function: | temperature & pressure compensation | ||||
Sampling Flow: | 0.5L±0.2L/min | ||||
Input Pressure: | <0.1MPa | ||||
Concentration Error : | < 0.5%FS | ||||
Line Deviation : | < 0.5%FS | ||||
Zero Drifting: | <±0.3%.FS | ||||
Response Time: | the signal is 0.03S, showing is 0.3S. | ||||
Ambient Temperature : | -20~50℃; | ||||
Sampling Caliber of Series Connection: | Bypass samplingΦ6 (6*4mm fast twisting interface) Bypass samplingΦ8 (8*6mm fast twisting interface) | ||||
Communication Mode: | RS-485 | ||||
Output Mode: | 4-20mA | ||||
Relay Signal: | High alarm, Low alarm | ||||
Power Supply: | AC 110-220V; | ||||
Dimension: | 230mm(height)×330mm(width)×150mm(depth) | ||||
Standard configuration: | Antiseptic flowmeter filter Ozone tail gas destroyer sampling pump |