AISI 304 antique copper mirror hairline finished etched stainless steel sheet ready to ship
Stainless steels are primarily used when corrosion or oxidation is a problem. The function that they perform cannot be duplicated by other materials for their cost. Over 50 years ago, it was discovered that a minimum of 12% chromium would impart corrosion and oxidation resistance to steel. Hence the definition “Stainless Steels”, are those ferrous alloys that contain a minimum of 12% chromium for corrosion resistance. This development was the start of a family of alloys which has enabled the advancement and growth of chemical processing and power generating systems upon which our technological society is based.
|
Product type |
Etched Colored Stainless Steel Sheet/Plate/Coil |
|
Grade |
200/300/400Series--SS201,304,316,430 |
|
Color |
Golden, Black , Sapphire Blue, Brown, Rose gold, Bronze, Purple, Gray, Silver, Champagne, Violet,etc. |
|
Thickness |
0.3-3.0mm |
|
Width range |
600mm - 1500mm |
|
Length |
2000/2438/3048mm customization |
|
Regular size |
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or customization |
|
Surface finish |
2b, BA, No.4, 8k, hairline, embossed, etched, vibration, pvd color coated, titanium, sand blasted, anti-fingerprint |
|
Origin |
POSCO,JISCO,TISCO,LISCO,BAO STEEL etc. |
|
Payment terms |
30%TT for deposit, 70% balance before shipment or LC at sight |
|
Lead time |
7 to 25 working days after the receipt of 30% deposit |
Stainless Steel Mirror Sheets/Plates
Mirror finish is created by mechanically treating the surface with a series of progressively finer abrasives. Alternatively a special rolling procedure is used which can simulate the appearance of mechanical abrasion. For this stage, it is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. The final process involves buffing the surface for 5-10 minutes to create a mirror-like, highly reflective finish.
Etched Stainless Steel Sheet
Etched patterns are created by selectively applying a protective acid resistant film to a highly polished surface and acid etching the unprotected areas. The film can be applied by hand painting,silk screening or other methods. Incorrect etching can undercut the protective film and result in rough edges. The etching removes a thin layer of stainless steel,changes the color to a dull silver gray,and roughens the surface. The etched pattern can be left as is or made more reflective. The finish is often electro polished after completion. Very elaborate patterns can be achieved. Both custom and stock patterns are available.
Hall wall panels, elevator,ceilings, building decoration, signboards, KTV luxury doors, elevator decoration, etc., as well as outdoor projects, advertising nameplates, cabinet ceilings, walkway boards, screens, hotels, lobby interiors and exterior walls.
|
Surface Finish |
Grade |
Color & pattern |
Width(mm) | Length(mm) | ||||||
| Regular Sizes(mm) | Other | |||||||||
| Sizes | ||||||||||
| Mirror | 200 series |
custom -ization |
0.3-3.0 | 1000 | 1219 | 1240 | 1250 | 1500 |
custom -ization |
Max6000 mm
|
| 300 series | ||||||||||
| 400 series | ||||||||||
| Hairline | 200 series | 0.3-3.0 | 1000 | 1219 | 1240 | 1250 | 1500 | |||
| 300 series | ||||||||||
| 400 series | ||||||||||
| Etched | 200 series | 0.3-3.0 | 1000 | 1219 | 1240 | 1250 | 1500 | |||
| 300 series | ||||||||||
| 400 series | ||||||||||
| Embossed | 200 series | 0.3-3.0 | 1000 | 1219 | 1240 | 1250 | 1500 | |||
| 300 series | ||||||||||
| 400 series | ||||||||||
| Stamped | 200 series | 0.3-3.0 | 1000 | 1219 | 1240 | 1250 | 1500 | |||
| 300 series | ||||||||||
| 400 series | ||||||||||
| Bead Blasted | 200 series | 0.3-3.0 | 1000 | 1219 | 1240 | 1250 | 1500 | |||
| 300 series | ||||||||||
| 400 series | ||||||||||
| Antique | 200 series | 0.3-3.0 | 1000 | 1219 | 1240 | 1250 | 1500 | |||
| 300 series | ||||||||||
| 400 series | ||||||||||
Get free sample & catalog. Click Here to contact us.
Our Advantages:
| 1.Good Quality + Factory Price + Quick Response + Reliable Service. |
| 2.One of the biggest stainless steel mirror sheets stock holder in Foshan. Ready to Ship |
| 3.All the stainless steel mirror sheet are strictly tested from raw materials to finished products. |
| 4.LOW MOQ |
The packaging of stainless steel sheets/plates
1. Stainless steel sheets are covered with wood for protection during transportation.
2.All stainless steel sheets will be packed in strong wooden cases.
3. Each case is well supported and reinforced.
4. Take pictures of container loading and seal the container.
5. Fast transportation speed and let customers know every step.
Get free sample & catalog. Click Here to contact us.
1,Q: Are you a trader or manufacturer?
A: We are manufacturer in Foshan, China. Welcome to visit our factory.
2,Q: What is your main business ?
A: Our main products include 201/304/304l stainless steel coils, 2B sheets, colorful sheets and all kinds of decorative sheets.
3,Q:What is your delivery time and the supply ability?
A: The delivery time normally within 7-15 working days,we can supply about 300,000 tons every month.
4,Q:What is the MOQ?
A: Usually our MOQ is 10 tons. If you are scheduling to place a trial order, pls feel free to contact us and we can meet your requirements.
5,Can you OEM or ODM?
A:Yes, we have a strong developing team. The products can be made according to your request.
6,Q:What kinds of payment methods do you accept?
A: T/T or L/C, besides, you can transfer to our bank account, Western Union or PayPal.
7, Q: How to clean and maintain its surface?
A: Use neutral cleanser and soft cotton cloth. Do not use acid cleanser and rough material.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier