ADTO aluminum support prop formwork aluminum concrete staircase formwork aluminum formwork malaysia

ADTO aluminum formwork system,construction aluminum formwork

Product Description:

1.Title:aluminum formwork  system (Monolithic casting)

2.Material: 

1) All of panels: 6061-T6 aluminum alloy

2) Accessories(waler, prop, wedge, pin, push pull prop, tie rod, wing nut): Carbon steel and casting iron

3.Product application: Monolithic casting or Separate casting(shear wall structure)

4.Inspection: Pre-assembly the panel to check product applicability before shipment

Product Advantages:
1. Monolithic and/or 2 stage casting

2. Stay in place posting for slab work no reshore required

3. Designed for 6100 kg per m2 of concrete pressure

4. Special bushing design

5. Special anchor bolt can be reused

6. Both flat tie and tie rod types can be provided

7. Can be resued more than 300 times

8. No need to use plywood

9. Special coating to avoid concret sticked on the surface of panels 

Introduction of 6061-T6 Aluminum Formwork System;

1. The extruded products will be cut into the right sizes.

2. Some products will be punched to make fastening holes.

3. Some products require additional welding works.

4.Check the products quality

5. Finalized products will be coated with release with release agent.

6.Completed the  pre-assembled before leaving the factory ,to make sure no mistakes .