Engine:: 4.2L, 2.5 4x4, 2.7L 2672cc 163cid, 3.5L 3456cc, 4.6L 4608cc, 4.0L 3956cc 241cid, 5.7L 5663cc 345cid, 4.6L 4608cc, 3.5L 3456cc, 3.5L 3456cc, 2.7L 2672cc 163cid, 4.6L 4608cc, 3.5L 3456cc

OE NO.:: ACT

Car Fitment:: Toyota Van, TOYOTA TRUCK, AMC, ANDORIA

Warranty:: 1 Year, 1 Year

Place of Origin:: Sichuan, China

Brand Name:: ACT

Engine Code:: No

Car Model:: 1.6-4.5L Injection 4 cylinder Car

type:: [ACT] Auto gas LPG system 4 cylinder / car sequential injection kits

Brand:: ACT

OEM No:: None

OEM:: Avaliable

Ambient Temperature:: -40°C ~ + 120°C

Diagnostics Connector:: RS232 or USB

Model Number:: LPG kits

Type:: FUEL TANK

Car Make:: 2568cyl gas engines

Certification:: ISO9001/BV/ECE110R

Packaging & Delivery

Products Description

ACT fuel injection kit 4 Auto gas LPG system 4 cylinder / car sequential injection kits car fuel system

Advantages of LPG/LPGV modified car

1) Emissions are significantly reduced. 　　 2) The toxicity of harmful emissions is lower than when gasoline is used. This mainly refers to the emission of hydrocarbons (HC), and the HC emission when burning LPG does not contain any more harmful components such as aromatic hydrocarbons. The hydrogen/carbon atomic ratio of LPG is 2.5~2.7, and gasoline is about 2.25. When LPG is used, CO2 emissions are lower. Considering the possibility of various compounds forming ozone, LPG emissions are definitely better than gasoline. 3) Since LPG fueled does not form an oil film on the engine intake manifold or the wall of the intake duct, and does not need to be enriched in cold state like gasoline, therefore, the emissions during the 40s after the start of the test cycle and during the warm-up process Better than gasoline. For the European III emission regulations to be implemented in the future, the adaptability is better.

Component :

The installation of the gas equipment comprises the following parts:

Product Name	Recommended Products
1. LPG Injector rail	VK37 / VAL/RAIL Injector rail
2. ECU kits	MP36 / MP48 / N18 / 6504 ECU kits
3. LPG reducer	ACT-09 / ACT-13 / vaporiser reducer
4. High pressure tube	6m*6mm carbon steel/copper/stainless steel high pressure tube
5. Manometer	CB08/201C Maometer
6. ECU Switch	MP36 / MP48 ecu switch
7. Filling Vavle	QF-T1H6/CTF-10/T2H/T2H-1/QF-T1H9/QF-T3H/ TES filling vavle
8. Cylinder tank	30-40-60-90-120 L LPG cylinder tank
9. Filter	12*12mm F-01 / F-02 / F-03 filter
10.Relay	Relay (5V or 12V)
10. Rubber cap and belt	common rubber cap and 2. 5M belt
11. LPG Casing	Water pipe 7.5141500 mm Vacuum tube 491500 mm Jet tube 5111200 mm Low pressure gas pipe 1016800 mm Bellows 34.5*650 mm
12. Accessories bags	LPG sequential injection accessories bags

1) Have higher economic benefits. Under the same conditions of engine thermal efficiency, the fuel cost of a car that uses natural gas alone as fuel is about half or even less than that of a gasoline car or a diesel car. (2) It has good social benefits and protects the environment.Considering the source of fuel, it is more beneficial to environmental protection. (3) Relatively safe.

Notice :

There are a few checks that need to be performed before the vehicle enters the installation workshop for conversion, to determine whether it is suitable for installation of the NGV equipment.

The structure of the vehicle must be inspected, to check if it is in a good state that allows adequate fitting of the supports of the various elements such as the NGV tank (s), the pressure regulator, the high-pressure pipe clamps, etc.

To make sure that the motor functions properly, check the following:

The ignition system: spark plugs, spark plug cables, contact points, condenser, ignition coil, ignition plate and distributor. The faulty state of any of these parts will cause a poor ignition spark, thus hindering the good functioning of the equipment.

The battery must provide 12 volts of power to the pressure regulator so that its electrovalve will open properly when the vehicle is operating on gas. The engine’s carburetion system must also work properly because even though a NGV system is being installed, the vehicle must be capable to operate in bi-fuel mode (gasoline/gas).

If the vehicle is not in good condition, the installation of the NGV system will not result in a satisfactory operation vehicle.

Packaging

A:Common Packing: Plastic bag + Label + Inner Box+Export Carton

B:Customized Packing: OEM Label, Inner Box,etc.

C:Package will be processed after all the tests finished.

Transportation

(1)By sea,by air,or by express (TNT,Fedex,UPS,DHL,EMS etc);

(2)We can provide freight services or deliver the goods to your designated forwarder.

(3)We support most inlan dport, such as Shanghai ,Guangdong .

FAQ

Why choose us?.................................................................

1)Top Quality. Every product is made through strictly production process and quality testing, which has pass the test of BV,ISO, CE and GOST, and been accepted by clients spreading over 43 countries even including Italy and Poland.

2)2-year Warranty. All products enjoying 2 years free of equipment maintainence warranty.

3)Free Sample. If you order a set of products for testing, we will return the freight to you from your next normal order;if you order a component for testing, we will return the sample charge to you.

4)Cost Saving. We provide long-life, shock-resistant autogas equipment with excellent quality and better performance, resulting in cost saving.

5)Quick Delivery. We promise to ship your goods with 3 days after confirming your order, or we would like to return your payment if you asked.

Can your factory supply OEM serive?.........................................

Yes, we can. Send us the sample or the detailed speicifications of the products you want to clone →calculate the cost of opening model →start to produce the sample for testing →continue to produce according to your feedback.

What's your MOQ, payment terms?............................................

Our MOQ :1 piece for sample order,5 pieces for normal order.

Our payment terms: T/T, D/P, L/C, Paypal, Westernunion.

Recommend Products

No desirable products?

How to start your business

Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier

Send Enquiry

To: Jesse Pan

Mio Outdoor Sales Co., Ltd

Enquire

Related Categories

AutoBrakeSystems AutoDriveSystems AutoLightingSystem（Old）AutoPerformanceParts AutoSteeringSystems(OLD)Automobileinterconnectedproducts