Characteristic of APT210 Series Pressure Sensor | ||||||||
1 | Germany technology Ceramic sensors, 10 years design | |||||||
2 | Ti special integrated processing chip is used in the circuit | |||||||
3 | Automatic temperature compensation -40~80 | |||||||
4 | Superior Long term Stability,low temperature drift, high sensitivity | |||||||
5 | Multiple electrical connection are optional ,easy installation | |||||||
7 | Wide range,available to Gauge,Absolute and sealed gauge type | |||||||
8 | HVAC Systems ·Energy and Water Treatment | |||||||
9 | EMI/RFI Rejection |
Parameter | Data | ||||||||||
Pressure Range | -0.1...0~0.01...100MPa | ||||||||||
Pressure type | gauge (G), absolute (A), sealed gauge (S) | ||||||||||
Overpressure | 150%FS | ||||||||||
Burst pressure | 250%FS | ||||||||||
Electronic Wire | 2 Wires | 3 Wires | |||||||||
Output signal | 4~20mA | 0~5VDC | 1~5VDC | 0~10VDC | 0.5~4.5VDC | 0.5~4.5 V radio metric | |||||
Power Supply | 12 ~ 30VDC, typical value: 24VDC | 10~30 V DC | 10~30VDC | 12~30VDC | 5 V DC | 5 V DC±5% | |||||
Accuracy (including: nonlinearity, repeatability, hysteresis, zero drift, full drift) | 0.25%FS(typ.) 0.5%FS(max.) | ||||||||||
Long-term stability | ≤0.2%FS/year | ||||||||||
Working Temp | −25℃~85℃ | ||||||||||
Storage Temp | −40℃~125℃ | ||||||||||
Temperature Compensation | -10℃~80℃ (Standard) | ||||||||||
Temp.coefficient of zero | ±0.1%FS/°C | ||||||||||
Temp.coefficient of span | ±0.05%FS/°C | ||||||||||
Insulating resistance | 100MΩ@250VDC | ||||||||||
Medium compatible | Water, gas and weakly corrosive fluids | ||||||||||
Short circuit protected | Yes | ||||||||||
Reverse polarity protection | Yes | ||||||||||
Electronic connection | Packard 3 Pin Connector; Smaller Hirschman Terminal Box IP65; Packard 3 Pin Connector with cable length by Customized. | ||||||||||
Pressure interface | M20x1.5, 1/8’’NPT male, 1/4’’NPT male/Female, G1/4’’ male/female, 7/16’’-20 UNF male/Female (by Customized) | ||||||||||
Material of pressure membrane | 316L stainless steel | ||||||||||
Response time(10%~90%) | ≤10msec(Rises to 90%FS) | ||||||||||
Vibration Shock | 10g/5~2kHz,axes X/Y/Z/20g half sine 11ms | ||||||||||
Water Proof | IP65 | ||||||||||
Certificate approving | CE Certificate available. | ||||||||||
EMC Standard | EN 61326-1:2013; EN 61326-2-3:2013 EN 61000-6-2:2005; EN61000-6-4:2007+A1 | ||||||||||
Weight | Net weight is about 0.1KG, Full Packing weight is about 0.2KG (Included 2 Meters Cable) |