AC load bank 1000kW Load Banks for generator testing
Introduction
A load bank is a device which develops an electrical load, applies the load to an electrical power source and converts the energy into waste heat. The purpose of a load bank is to mimic the operational or “real” load that a power source will see in actual use.
Load Banks are ideal for routine load testing of emergency power systems including generators, uninterruptible power supplies, and turbines. These load banks can also be used for factory production line testing for manufacturers of diesel-engine gen-sets or for manufacturers of UPS (Uninterruptible Power Supplies). load bank products offer power capacities ranging from 10 kilowatts to 5,000 kilowatts.
we offers a variety of standard load bank sizes which fall into two product categories, either stationary or portable. Within the stationary category, we offers both pad mounted and radiator mounted load banks. Within the portable category, we offers both caster portable and trailer mounted load banks. Resistive load banks, reactive load banks, or combination resistive/reactive load banks are available. We also offer a complete line of rack-mounted server load banks for Data Center testing and commissioning.
kaixiang load bank designs with standard digital controls Single or dual-voltage designs; 50 Hz, 60 Hz or 400 Hz frequencies Resistive, reactive or combination resistive/reactive load banks Load banks are forced air cooled with high volume industrial blowers Safety circuits include fan failure and over-temperature protection Custom engineered designs are available to meet any unique application
1.The system is a self-developed device used for electricity load testing by Kaixiang Technology. It perfectly combines the dry type load module and measurement and control module, precisely test output power and load performance of kinds of generator set, and realize setting, fluctuation, instant load, instant unload, record wave analysis, and harmonic wave analysis, so to finish all the static parameters and dynamic parameters testing.
System mainly consists of resistance load, data collecting, control system, cooling device, etc. The system can test output power and load performance of generator sets.
2.System can load power in rated range, measure generator steady-state 3 phase voltage, current, active power, reactive power, apparent power, power factor, frequency, and running time, and simulate the generator set real load working state. Power input using sectional type, energy dissipation type load, forced-air cooling, 3 phase fan decentralized supply air, air-flow is sufficient and low noise.
3.System can work with PC software to realize intelligent operation, automatically finish the parameters testing, and create testing data table, curves and reports that can be printed, reduce a lot of manual operation.
Specification
400VAC, 3 phase 4wire, 50Hz |
|
Rated Load Power |
Resistive load: 1000kW |
Installed Capacity |
Resistive load: 1000kW |
Load Step |
1,2,2,5,10,10,20,50,100,200,200,200,200kW, min step load: 1kW |
PF(Power Factor) |
1 |
Load Tolerance (each step) |
±5% |
Load Tolerance(overall) |
±3% |
0.5 class |
|
Control Power |
|
Load power supply input——Copper bar Control power supply input——Connector-bar |
|
F |
|
Duty Cycle |
|
Cooling Type |
Force air cooling, horizontal air inlet and horizontal air outlet |
Hoisting, there are lifting lug on top and castors at the bottom of casing |
|
Dimension |
About 2440mm*1400mm*1680mm(L×W×H) |
Weight |
About 1200kgs |
As required |
|
Workplace |
Indoor or outdoor |
-20℃~+50℃ |
|
≤95% |
|
≤2500 meter |
|
86~106kPa |
|
Brands of Main Components |
|
Contactor |
Schneider |
Fuse |
Miro |
PLC |
Siemens |
Data processing software |
Kaixiang(self-developed) |
Alloy Resistance |
Kaixiang(self-developed) |
Certificate and qualification
Company introduction
Hebei Kaixiang Technology was established in 1994, long-term focus on smart power detection technology development and application in shipbuilding, petroleum, offshore platforms, data centers, communications, power, military, aviation, research institutes and other areas, and in strict accordance with the ISO9001 international quality standard management system for the design, manufacture and service.The company's core technologies are independent research, has seven patents, 10 software copyrights, two corporate standards.Among them, Kaixiang "smart power marine generators AC load," Science and Technology Department of Hebei Province has been named the international advanced level scientific and technological achievements, the enterprise standard "dry AC load" to upgrade the industry standard by the Ministry of publicity.
Overview of company
What We Can Do
1. Professional technical team with more than 20 years design experience.
2. Customized technical solutions meet customer’s individual requirements.
3. Skilled workman insure the reliable assembly technology.
4. Strict inspection procedures throughout the whole production flow.
5. Prompt delivery & custom clearance make sure the customers receive the goods on time.
6. Perfect after sales service create good user experience.
7. Reliable quality & competitive price help customers to maximize profits.
8. Timely feedback save valued time for the customer.
9. Humanized management system build homelike work atmosphere.
10. Continuous devote to public welfare undertakings strive for harmonious society.
Exihibition hall
Application