The intelligent lawn mower can complete the work of mowing the lawn independently, without direct human control and operation, and has low power, low noise, exquisite and beautiful appearance, and greatly reduces manual operation.
Model | DB750 |
Dimensions | 930*860*580mm |
Package Size | 1060*960*810mm |
Total Weight | 130kg |
Cutting Width | 550mm |
Height Adjustment | 10-150mm |
Cutting Height | 20-150mm |
Walking Speed | 0-6km/h |
Gradeability | 0-30° |
Min. ground Clearance | 20mm |
Operation Method | Remote control walking, remote control cutter head lifting |
Way Of Walking | Tracked self-propelled |
Engine Brand | LONCIN Vertical axis four stroke |
Power | 7.5hp |
The intelligent lawn mower is suitable for clearing all kinds of weeds such as reeds, alfalfa, fish grass and other large and small plots of plains, hills, terraces, orchards, and triangles, with simple operation and high work efficiency. We usually use lawn mowers for school and street beautification. In foreign countries, many families have lawn mowers for weeding their gardens.
Mini remote control lawn mower, mainly used in orchards, gardens, lawns, wastelands, slopes and other places with narrow and sloped working spaces.
The main feature is remote control walking, equipped with a gasoline engine, and a liftable cutter head. It is safer and more efficient to use , Environmental protection, reduce noise.
1. The choice of a new generation
2. nice quality with high performance
3. automatic one, saving time and energy
4. remote control, making your job with high efficiency
Operating instructions of lawn mower
1, Preparation before starting the remote control mower
(1)Be sure to confirm the tightness of screws of all parts before starting up.
(2)Turn on the machine power key switch, pull back the right control lever and hold it, then press the switch key of the remote
controller to turn on the remote controller.
(3)When the remote control is turned on, a "drip" will appear, indicating that the machine matches the remote control normally.
(4)engine start;
a,Release the brake on the right side of the engine (also disconnect the flameout switch);
b,Turn the left throttle counterclockwise to the end (so as to open the engine throttle at the same time);
c,Pull hard on the pull rope of the hand pull plate to start the engine;
d,Adjust the throttle to the proper speed in time after starting the engine;
e,Operate the remote control to cut grass.
2,Remote control description:
D/R switch (large and small rudder): adjust the walking speed of the machine (the factory default is high speed gear) The left
joystick controls the machine to walk forward and backward, and the right joystick controls left and right turns
5 Channel (two-stage switch):The cutter head rises and falls to adjust the cutting height of the cutter head.
Rudder fine adjustment (left-right adjustment): When adjusting the walking speed of the machine, the electronic adjustment in the
machine will make a "drip" sound. Only then can the "Rudder fine adjustment" button be used until the electronic adjustment in the
machine does not make a sound.
Throttle fine adjustment (up and down adjustment): the same principle as the "rudder fine adjustment" button.
Power switch: push up to turn on the remote control, and pull down to turn off the remote control.
engineering rubber track, non-slip and wear-resistance, good climbing ability
managenese steel blades, romote control lift cutter, fast mowing
The LED lighting has high brightness and can work normally even at night