AC/DC 12V 10A 9 channels CCTV camera power supply box distribution box
OUTPUT | DC VOLTAGE | 12V | 24V | |||
OUTPUT POWER | 120W | 120W | ||||
CURRENT RANGE | 10amp | 5amp | ||||
RIPPLE & NOISE(max.) | 120mVp-p | 150mVp-p | ||||
CHANNELS | 9 Ways | |||||
VOLTAGE ADJ. RANGE | ±10% | |||||
LINE REGULATION | ±1.0% | |||||
LOAD REGULATION | ±2.0% | |||||
VOLTAGE TOLERANCE | ±2.0% | |||||
SETUP,RISE TIME | 800ms, 50ms at full load | |||||
HOLD UP TIME | 60ms | |||||
INPUT | VOLTAGE RANGE | 110/220V AC by switcher | ||||
AC CURRENT(Typ.) | 3.5A/ 226VAC 1.8A/ 240VAC | |||||
FREQUENCY RANGE | 47-63Hz | |||||
EFFICIENCY(Typ.) | 80% | |||||
INRUSH CURRENT(Typ.) | COLD START 15A/115VAC 30A/230VAC | |||||
LEAKAGE CURRENT | <3.0mA/240VAC | |||||
PROTECTION | OVER LOAD | 115%~135% of rated power; Pulsing hicuup shut down | ||||
OVER VOLTAGE | Rated output voltage of 105%~150% start overvoltage protecion | |||||
Protection: burst mode,load of abnormal conditions removed the automatic recovery | ||||||
SHORT CIRCUIT | voltage off and reset input for recovers | |||||
ENVIRONMENT | WORKING TEMP. | -0℃ ~ +45℃ (Refer to output load derating curve) | ||||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||
STORAGE TEMP.,HUMIDITY | -20℃ ~ +85℃ 10~95% RH | |||||
TEMP. COEFFICIENT | ±0.05%/℃ | |||||
COOLING METHOD | BY FREE AIR CONVECTION | |||||
SAFTY | WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC | ||||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG,O/P-FG: 100M Ohms/ 500VDC | |||||
SAFTY STANDARDS | Refer to CE EN60950-1 | |||||
EMC STANDARDS | Refer to EN55022,EN55024,EN61000 | |||||
OTHERS | POWER SUPPLY DIMENSION | L160*W98*H42MM | ||||
9CH BOX DIMENSION | L235*W205*H50MM | |||||
WEIGHT | 1.56Kg/PC, 10PCS/Carton size:45*32*30MM | |||||
POWER SUPPLY MATERIAL | Aluminium | |||||
9CH BOX MATERIAL | 1.0mm tchickness iron (grey plating) |