Properties | Test Method | Test Condition | Units | Typical Values | ||||
Physical | ||||||||
Melt Flow Rate | ASTM D-1238 | 220℃, 10Kg | g/10min | - | ||||
Specific Gravity | ASTM D-792 | 23℃ | g/cm3 | 1.03 | ||||
Ash | - | 800℃,30min | % | - | ||||
Mechanical | ||||||||
Tensile Strength | ASTM D-638 | 50mm/min | MPa | 46 | ||||
Elongation at Break | ASTM D-638 | 50mm/min | % | 14 | ||||
Flexural Strength | ASTM D-790 | 2mm/min | MPa | 62 | ||||
Flexural Modulus | ASTM D-790 | 2mm/min | MPa | 1800 | ||||
Impact Strength, IZOD non-notched | ASTM D-256 | 23℃ | KJ/m2 | - | ||||
-30℃ | KJ/m2 | - | ||||||
Impact Strength, IZOD notched | ASTM D-256 | 23℃ | KJ/m2 | 17 | ||||
-30℃ | KJ/m2 | - | ||||||
Thermal | ||||||||
Heat Deflection Temp. | ASTM D-648 | 1.8Mpa | ℃ | 93 | ||||
0.45Mpa | ℃ | 98 | ||||||
Others | ||||||||
Mold Shrinkage | ASTM D-955 | 23℃ | % | 0.6-0.9 | ||||
Flammability | UL94 | 1/16” | HB |