ABS 200 Holes Hand Operated Capsule Filler Manual Capsule Filler for 0#

This is a manual capsule filler made from clear acrylic material, chemical resistance,lightweight with compact size. It includes 209 holes enable you assemble 209 pieces pill capsules once greatly save your time, best choice for the DIY capsule maker.For Personal Use, Professional Grade Lab Use, University, Sample Testing.

https://www.youtube.com/watch?v=8andPSl-yMg

Material:Plexiglas
Capsule Filling Capacity:200pieces/time 
Comaptible Capsule Model:#00,#0,#1,#2,#3,#4
Size:28.5*18.5*10CM
Net Weight:1.5Kg

One unit included as below :
1. Body plate
2. Cap plate
3. Arranged plate
4. Middle plate
5. Tamping tool
6. Scoop

Feature:
1)209 holes manual capsule filling machine fit for#00,#0,#1,#2,#3,#4 capsule
2)Made from Plexiglas material,chemical resistance, long lifetime
3)Based on the capsule structure and pill filling theory, fast filling and assemble speed, envenly filling level, high assemble success rate up to 99.99%
4)Lightweight and compact size perfect for small batch pillcapsules production
Package included:
1X 200 Holes Manual Capsule Filling Machine

1,Take the cap sheet. Place it on a clean, dry surface.
2,Place the encapsulation sheet on top of the cap sheet using the black pegs to fix it correctly in place
3,Pour capsule tops into the encapsulation sheet and, using a circular motion, gently shake the tops into the holes. While doing this, cover the gap in the wall of the encapsulation sheet with one hand to avoid spilling the tops.
4,When the holes are filled pour out the excess tops.
5,Remove the encapsulation sheet and put the filled cap sheet to one side.
6,Now take the bottom sheet. Fix the encapsulation sheet to the bottom sheet, using the black pegs to fix it correctly in place.
7,Pour bottoms into the encapsulation sheet and shake as before to fill the holes. Pour off excess bottoms
8,Remove the filled encapsulation sheet and put it carefully to one side.
9,Pour a scoop of powder filler onto the bottom sheet and use the spreader to fill the bottoms.
10,If the bottoms are not filled enough, use the tamping tool to compress the fillings and repeat the previous procedure.
11,Remove the tamping tool and put it and the spreader to one side.
12,Take the filled cap sheet and place the middle sheet on top using the black pegs to fit it correctly in place.
13,Turn the cap sheet / middle sheet over and fix to the bottom sheet.
Using both hands and equal pressure, press down once to fit both parts of the capsule together.

Packaging details :

* Inquiry and consulting support. 

* Sample testing support. 

* View our Factory.

* Training how to instal the machine, training how to use the machine. 

* Engineers available to service machinery overseas.

91.8% Response Rate

91.8% Response Rate

91.8% Response Rate