Specifications
alumina ceramic bead for pad heater
1,CP3,CP4,CP6,CP8,CP10
2,Cr20Ni80 stranded wire inside
3,2.7KW-10KW,60V-80V
Infrared Ceramic Electric Heating Pad
Alumina Ceramic Bead For Pad Heater is manufactured by weaving multi-stranded 80/20 Nichrome electric resistance heating wirethrough passages within interlocking ceramic beads. The beads are molded from sintered 95% Alumina ceramics, more that 3/8-inchthick. The Alumina has excellent high-temperature dielectric properties which combined with the interlocking bead design provideFCP heaters with exceptional electrical insulating qualities.
The interlocking bead design imposes rigidity along the heater length while allowing flexibility along the heater width, enabling it toconform to the curved surfaces of pipes and pressure vessels. A nominal nine-inch length of nickel wire is welded to each end of theNichrome wire to create a cold tail to prevent the electrically insulated camlock connectors from being heated.
Flexible Ceramic Heating Mat are generally available to two standard values: 80VAC, which are the most common, and 60VAC. Custom designedheaters, however, can also be provided. All 80VAC heaters are rectangular with a surface area of 120 square inches and a thermalpower of 3.6 kW, producing a power density of 30 W/in2with an electrical current of 45 amps. The 60VAC counterparts are simplythree-quarters the size of an 80VAC pad with a surface area of 90 square inches and a 2.7 kW thermal power but with the samepower density and electric current. All 80VAC heaters can be run on 60VAC, but their kW output is reduced from 3.6 to 2.
Characteristics & Properties for Infrared Ceramic Electric Heating Pad
Voltage (V) | 80 |
Current (A) | 45 |
Power (kw) | 3.6 |
Maximum Use Temperature*, °C (°F) | 1121 (2050) |
Heating Element Type | Ni-Cr |
Lead Length (in.) | ~24 |
Insulator Type | Aluminum Oxide |
Insulator Color | Pink |
Advantage
1.Low MOQ: It can meet your promotional business very well.
2.OEM Accepted : We can produce any your design as long as you provide us the drawing.
3.Good Service : We treat clients as friend.
4.Good Quality :We have strict quality control system .Good reputation in the foreigner market
5.Fast & Cheap Delivery: We have big discount from forwarder (Long Contract)
Order Guide
Check below for more information on placing
1. Inquiry-Professional and accurate quotation. |
2. Confirm the price, trade term, lead time, artwork, payment term etc. |
3. MICC sales send the Proforma Invoice with MICC seal. |
4. Customer arranges the payment for deposit and sends us bank slip. |
5.Initial Production step-Inform the clients that we have got the payment. And will make the samples according to your request, send you photos or Samples to get your approval. After approval, we inform that we will arrange the production & inform the estimated time. |
6. Middle Production-send photos to show the production line which you can see your products in . Confirm the estimated delivery time again. |
7. End Production-Mass production products photos. |
8. Clients make payment for balance and MICC ships the goods. Inform the tracking number and check the status for clients. |
9. The order is finished perfectly when you receive the goods and get satisfied with them . |
10. Feedback to MICC about Quality , Service, Market Feedback & Suggestion. And we will do better . |