MODEL-TP | 10kw | 20kw | 30kw | 40kw | 60kw | 100kw | 150kw | 200kw | |||||||
Rated capacity | 10kw | 20kw | 30kw | 40kw | 60kw | 100kw | 150kw | 200kw | |||||||
Operation mode and principle | PWM based on DSP accurate control technology and double built-in MCUs complete isolation of the output power supply | ||||||||||||||
AC phase number | Three-phase +N+G | ||||||||||||||
AC input voltage | 220VAC/380VAC +- 20% | ||||||||||||||
DC input voltage | 192VDC/220VDC/240VDC/384VDC | ||||||||||||||
DC input floating voltage | 217.6VDC/244.8VDC/272VDC/435.2VDC | ||||||||||||||
DC cut-off voltage | 172.8VDC/194.4VDC/216VDC/345.6VDC | ||||||||||||||
AC output phase number | Three-phase +N+G | ||||||||||||||
AC output Voltage | AC220V/AC380V+-1% (Steady load) | ||||||||||||||
AC output Frequency | 50HZ/60HZ +-5% | ||||||||||||||
AC output Efficiency | >95% | ||||||||||||||
AC output Output waveform | Pure sine wave | ||||||||||||||
AC output THD | Linear load: <3%; non-linear load: <5% | ||||||||||||||
AC output Dynamic load voltage transient | <+-5% | ||||||||||||||
AC output Instant recovery time | <100ms | ||||||||||||||
Switch time between the grid to battery | 3S ~5S | ||||||||||||||
Unblanced voltage | 120%, 20s; >150%, 100ms | ||||||||||||||
Computer communication interface | RS232/ RS485 (SNMP remote monitoring newwork adapter) | ||||||||||||||
Operating temperature | -10 ~ 40℃ | ||||||||||||||
Relative humidity | 0 ~ 90% (No condensation) | ||||||||||||||
Noise | 40-50dB | 50-60dB | 60-70dB | ||||||||||||
Inverter dimension(mm) | 750*580*920 | 1138*795*1725 | 1138*795*1725 | 1380*950*1800 | |||||||||||
Package weight(KG) | 195 | 238 | 270 | 360 | 738 | 840 | 1065 | 1174 |