93% Recovery Rate Black Car Used Oil to Diesel Fuel Oil Refining Plant
93% Recovery Rate Black Car Used Oil to Diesel Fuel Oil Refining Plant
YJ-DSL series is suitable for used engine oil, motor oil, heavy fuel, bunker oil, oil sludge, kinds of lubricant oil and other pyrolysis oil to clean diesel. After our machine's recycling, then the waste oil can be changed into clean diesel oil. Which can be used in ships, trucks, generators and so on directly
Working Process
The working process for Scrap Engine Oil To Standard Clean Diesel Oil Distillation Refinery Machine is to pump the waste oil into the distillation kettle, the heating system will start the stirring device. Gasoline components and water in the used oil can be distilled out when the temperature reaches to 50 ℃-100℃. When the temperature reaches to 160 ℃-260℃, after efficient catalytic and cracking, the light and heavy components will convert to diesel from vapor. Finally, we filter all collected diesel oil liquid, then we can get high quality finished diesel oil.
Cracking Process
The method for Scrap Engine Oil To Standard Clean Diesel Oil Distillation Refinery Machine is cracking it into fuel. The feature for the cracking process is very safe cause the temperature setting is rigorous and the machines is stabilization. Our engineers commit to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties.
Features
1)High recovery rate
the highest recovery rate can reach 93-95%. Gasoline 2-5%, diesel fuel 85-90%.
2)Easy operation
The YJ-DSL series machine is easy to operate, low running cost, it need only 1-2 workers to operate
3)Rich raw material
YJ-DSL series can recycle all kinds of used black diesel, used engine oil, used machine oil, used mineral oil and almost all industrial oil to diesel fuel. The cracked oil is able to be used as industrial or civil-use fuel, even power driven fuel.
4)Efficient catalyst
It is normal safe and available. It can help the waste oil further catalytic cracking to ensure a higher recovery rate and good quality of oil
Application
| Machine Parameter | ||||||||||
| Handling capacity | T/D | 0.5 | 2 | 4 | 5 | 10 | 20 | 30 | 50 | 100 |
| Recovery rate | % | <=93 | ||||||||
| Teperature | ≤ 430 | |||||||||
| Working Noise | dB (A) | 45 | 60 | 65 | 65 | 65 | 70 | 70 | 75 | 75 |
| Total power | KW | 10 | 15 | 20 | 22 | 55 | 90 | 130 | 170 | 260 |
| DimensionMM | L | 5000 | 8000 | 1100 | 12000 | 14000 | 25000 | 30000 | 60000 | 100000 |
| W | 3500 | 4000 | 4500 | 5000 | 8000 | 8000 | 10000 | 16000 | 22000 | |
| H | 6000 | 7000 | 7000 | 7000 | 7000 | 8000 | 8000 | 8000 | 8000 | |
| Pyrolysis Diesel Oil Parameter | ||||
| Item | Test standard | Result | Standard value | |
| Density(15℃) | ASTM D1298 | 0.84 kg/l | ---- kg/l | |
| Kinematic viscosity(40℃) | ASTM D445 | 3.36 cst | 1.6-5.8 cst | |
| Flash point(closed cup) | ASTM D93 | 60 ℃ | ≥55 ℃ | |
| Pour point | ASTM D97 | -19 ℃ | ≤ 0 ℃ | |
| Distillation temperature | 10% oint | ASTM D86 | 204 ℃ | --- |
| 50%point | 289 ℃ | ≤300 ℃ | ||
| 90%point | 344 ℃ | ≤355 ℃ | ||
| 95% point | 359 ℃ | ≤365 ℃ | ||
| Cetane index | ASTM D976 | 54.42 | ≥45 | |
| Water content | ASTM D95 | Trace%vol | ≤Trace %vol | |
| Sulfur content | ASTM D1226 | 0.151%wt | ≤0.2 %wt | |
1.what ability we have?
mature technologies and skillful workmanship (we control every single manufacturing process and make sure it will be done perfectly in our factory with the lowest cost with the best quality assurance). products quality guarantee and about 30 days free train(competitors cant spend much time in you factory,stay long you will find many problems about their machine)
2.Why we need to add the catalyst?
Catalyst will keep the recycled oil stabilization, avoiding the recycled oil oxidate and color change back to black. So the recycled oil from our machine will keep yellow at least half one year or one year.
3.Why the machine need work under vacuum condition?
The machine work under negative pressure, the boiling rage of the used oil is lower under high vacuum condition, if without vacuum unit, the oil will crack when temperature up to 420-450 degree( and the oil will become to diesel when temperature is 450 degree)
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier