900M-T-S3 5.2mm Chisel Soldering Tip Suits Hakko 926, 936, 700, 701 Stations

Hakko 900M Series Soldering tips, Desoldering, Rework Tips, Nozzles

900M Series Tips

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System)
Hakko 907 Soldering Iron
Hakko 907-ESD Soldering Iron
Hakko 900M Soldering Iron
Hakko 900M-ESD Soldering Iron
Hakko 928 Soldering Station
Hakko 936 Soldering Station
Hakko 936-ESD Soldering Station
Hakko 937 Soldering Station
Hakko 703 Soldering Station

Replacement bent conical soldering iron tip for ATTEN AT100D, AT201D, AT204D, AT60D, AT80D, AT937B, AT938D, AOYUE 701, 701A+, 738, 768, 899A+, 906, 906C, 908+, 909, 936, 937, 937+, 950+, 968, Lukey 702, 850D, 852D+, 852D+FAN, 852D-300-301, 853D+, 868, 898, 936+, HAKKO.

 Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1 Made with pure oxygen-free copper

2 Long time electroplating makes the plating layer more denser, the life time is longer than other tips

3 Short lead time for standard robot tips

4 The cost is much lower than original tips

5 Custom made available

6 Offer sample for testing

We can custom-made packaging!!!

JNL has been specializing in soldering iron tip design and manufacturing for over 20 years, offering soldering tips to fit all of the most popular stations like Hakko, Weller, Pace,Apollo,JBC,QUICK,GOOT,UNIX & more!  Long Life: Using a high-quality JNL soldering iron replacement tip increases solder speeds and decreases the total cost of manufacture. Higher temperatures and high tin content solders, common in lead-free solder processes, place additional strain on soldering iron tips. The long life of a  JNL solder iron tip reduces tip changes, decreasing the total number of tips used and decreasing production time.
Rapid Heat Recovery: JNL soldering tips are constructed from highly conductive premium grade copper to transmit heat to the work more quickly than other brands. This quick heat recovery enables more joints to be soldered per minute, thus reducing manufacturing time and costs.
Tip Shapes & Sizes for Every Application
JNL soldering tips are available in a wide variety of geometries including pointed / conical, blade/knife, chisel/screwdriver, and bevel. This allows you to solder fine contact areas, reach isolated areas on dense board designs, solder large pad areas, drag solder, or quickly remove solder with desoldering braid.

* If the sponge cleaner is utilized, air-blow cleaning is normally not required.
Some applications require air-blow & sponge tip cleaning (depending upon tip type)
Standard cleaning duration is 0.5 second
The iron tip does not need to be extended if not required
The air-blow cup is not included with the standard Luna system

* If the tip is not “wetting” with solder (oxidation)

Remove pre-solder on tip completely.
Remove oxidation by sand paper after cooling down the iron tip to room temperature.
Turn on the power and apply solder on the iron tip during rising the temperature (manually).
The tip will wet with solder by the above process.

   *****More information please contact with us*****

Contact Person: Vivi Zhang

Whatsapp:+86 15986790076

Skype:smtvivi

E-mail: soldertips  @  foxmail.com