Pneumatic masts are a type of elevation solution using compressed air to raise the central column to its extended height. The masts can either be locking, which each section locks into place once it reaches its maximum extension - designed for safety and long term use, or non-locking where each section sits on cushion of air for short time application
---------3 different models
Model"AT8"---no cable and no lock, for Short time using and small head load.
Model"AT9"---with lock. for long time using and large head load.
Model"AT7"---with cable. for mounting camera, lights or antenna.
If no electricity and head load is not heavy, lift control could be foot pump or hand pump---manual lift.
If thers is electricity and head load is heavy, lift control should be air compressor, easily and quickly.
Mast model | TAL-P8-2.25-50 |
Extended height | 8m |
Retracted height | 2.25m |
Max. payload | 50kg |
No. of section | 5 |
Outer tube diameter | 140-118-98-82-66mm |
Thickness of tube | 5-4-4-3.5-3mm |
Main material | aluminum alloy |
Diameter of top plate | Diameter of 150mm, 4 holes of 11mm |
Diameter of bottom base | Diameter of 235mm, 4 holes of 11mm |
Locks | Yes |
Working air pressure | 0.2-0.25Mpa with loads |
Wind load capacity | 100-110km/h with guy wires fixed |
Accessories | AC220V air compressor----1pc Air hose------1pc Regulator valve-----1pc Tripod-----1pc Earthing rods-------3pcs Guy wires-----------8pcs |
Kit Contents | ||||
Item | Description | Quantity | ||
1 and 8 | Mast with tripod | 1set | ||
2 and 5 | pneumatic or manual pump | 1pc | ||
3 and 4 | Guy ropes and Ground anchor | 4pcs | ||
6 | Regulator valve | 1pc | ||
7 | Air hose | 1pc |