How to program
Step - 1
Factory testing code deleting. Simultaneously press and hold button Arms and button Disarm until LED flashes 3 times. Keep pressing button Arm. Release button Disarm then press button Disarm slowly 3 times, LED flashing. Release button Arm. Factory code is now deleted. If all has been done correctly then after short pressing of any button LED light will not flash.
Step - 2
Place the original remote control and copy remote control as close as possible together (back to back). Press and hold one button on your original remote and the button on copy remote control, which you wish to be programmed on at the same time for approximately 3 seconds. LED indicator then flashes three times, followed by a continuous fast blinks, indicating that the button is successfully copied. Repeat the above clone step for other buttons you wish to copy.