865-868Mhz/902-928MHz USB and TTL232 UHF RFID reader module writer with ceramic antenna
Integrated antenna character Be sensitive and stable to the tags identify. Stable reading distance 2-3 meters. Multi-tags identify, >50pcs tags. Reading distance speed, >50pcs/sec.
|
|
Solve the exothermic problem completely. No need for connecting any other outer radiating device. It can work without exothermic reaction in the normal indoor temperature. Sustain electricity<200mA @ 3.5V (26 dBm Output). Pulse peak current<260mA.
|
|
Outstanding stability: 24 hours x 365days work normally. Appearance little influenced by cover, electromagnetic environment etc. Wide temperature design and the temperature drift coefficient.
|
|
Good consistency: Good design in consistency. Choose the top level components to keep each parameters stable and consistence.
|
|
Brief and high efficient interface of hardware and software. Peripheral circuit is very easy. The signal power, no need for extra connecting tantalum capacitor.
|
|
Parameter |
|
Working Voltage |
DC 3.5V – 5 V |
PCB size |
Pcb size:50*50mm , Ceramic antenna size:40*40mm Overall height:8.5mm |
Standby current |
<80mA (EN pin high level) |
Sleeping current |
<100uA (EN pin low level) |
Operation current |
180mA @ 3.5V (26 dBm Output,25°C). 110mA @ 3.5V (18 dBm Output,25°C). |
Operating time |
<100mS. |
Operation temp. |
- 20 °C - + 70 °C |
Storage temp. |
- 20 °C - + 85 °C |
Working humidity |
< 95% ( + 25 °C) |
Protocol |
EPC global UHF Class 1 Gen 2 / ISO 18000-6C |
Frequency |
865-868MHz/902-928MHz |
Working area support |
US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 Mainland China; Japan; Korea; Malaysia; Taiwan |
Output power |
18-26 dBm |
Read/write range |
Read: 200-250cm;write: 10-50cm(adjusted) |
Output power accuracy |
+/- 1dB |
Output power flatness |
+/- 0.2dB |
Receive sensitivity |
< -70dBm |
Store tag peak speed |
> 50pcs/sec |
Tags storage capacity |
200pcs tags @ 96 bit EPC |
Tags RSSI |
support |
Communication interface |
TTL Uart interface |
Communication baud rate |
115200 bps(default and recommend) 38400bps |
Heat-dissipating method |
Air cooling(no need for out install cooling fin) |
Pin definition |
|
1 |
GND |
2 |
EN(RF module enable power: HIGH(ACTIVE), LOW(POWER DOWN)) |
3 |
RXD (Data input, TTL level) |
4 |
TXD (Data output, TTL level) |
5 |
VCC DC3.5V-5V |