802.11b/g/n/ac 750mbps Ceiling AP wireless ceiling access Point
802.11b/g/n/ac 750mbps Ceiling AP wireless ceiling access Point
A770/A771 11ac Ceiling Wireless Access Points based on SNMP/CAPWAP Protocol, it is specifically designed to operate in Residential and commercial applications. Comply with IEEE 802.11ac/n/g/b standard, it is 2.4GHz and 5GHz dual radio, with data rate up to 733Mbps(300Mbps in 2.4G, 433Mbps in 5G), enable users to enjoy more stable and faster Ethernet surfing even access into 100+ end users; Tested 101 concurrent end users.
Equipped with Qualcomm Chipset, 500mW high RF Power and high gain 5dBi antenna, it is 4x WiFi Range than normal wireless router or wireless access points, tested in 6 hotel room WiFi Range.
Build in advanced WiFi channel analysis tool, adjustable RF Power, clients isolation, tag VLAN, it can applied in different environment with stable and safety performance.
Centralized managed by WLAN control, work with PoE switch, it is plug and play, Zero configuration in large quantity installation. What’s more, it can access into cloud server for remote management, advertisement and captive portal authentication like Facebook Login, Google Login, Member Login and SMS Login.
Applications
This high power, dual radio and high speed wireless access point can be deployed in a wide array of situations for both residential and commercial applications.
Residential Applications:
DC Power available, Adjustable RF Power based on room range; Then support Gateway operation mode, no need more wireless router; What’s more, support cloud server access for remote control, to provide effective wireless connectivity.
Commercial Applications:
Support PoE, High RF Power with 6 hotel room wifi range, 100+ end users, work as wireless AP and managed by WLAN Controller, A770/A771 public applied in hotel, school, shopping mall in mass installation.
Please note: in Connection Diagram 2, it support captive portal authentication like Google/Facebook/SMS/Member/WeChat log in.
Wireless: | |||||||||
Standard | 802.11ac/b/g/n, MIMO technology | ||||||||
Speed | 433Mbps compatible with 5.8GHz 300Mbps b/g/n for 2.4GHz | ||||||||
Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM DSSS = DBPSK, DQPSK, CCK | ||||||||
Channel | Ch.1-13 for 2.4GHz Ch.36-165 for 5.8GHz | ||||||||
Frequency band | 2.412GHz-2.472 for 2.4GHz 5.180GHz-5.825Ghz for 5.8GHz | ||||||||
Receive Sensitivity & RF Power | |||||||||
Frequency | Mode | Data Rate | Standard | Result(dBm) | RF Power (±1.0dBm) | ||||
CH1 | CH6 | CH11 | |||||||
2.4GHz | 11b | 1Mbps | ≤-83 | -99 | -99 | -99 | 28dBm | ||
11Mbps | ≤-76 | -92 | -92 | -92 | |||||
11g | 6Mbps | ≤-85 | -95 | -95 | -95 | 28dBm | |||
54Mbps | ≤-68 | -82 | -82 | -82 | 27dBm | ||||
11n HT20 | MCS0/8 | ≤-85 | -95 | -95 | -95 | 28dBm | |||
MCS7/15 | ≤-67 | -79 | -77 | -78 | 26dBm | ||||
11n HT40 | MSC0/8 | ≤-82 | -93 | -93 | -93 | 28dBm | |||
MCS7/15 | ≤-64 | -75 | -75 | -75 | 26dBm | ||||
5GHz |
| CH36 | CH100 | CH149 |
| ||||
11a | 6Mbps | ≤-85dBm | -92 | -92 | -92 | 26dBm 23dBm | |||
54Mbps | ≤ -68dBm | -75 | -75 | -75 | |||||
11n HT20 | MCS0/8 | ≤ -85dBm | -91 | -91 | -91 | 26dBm | |||
MCS7/15 | ≤ -64dBm | -72 | -72 | -72 | 23dBm | ||||
| CH38 | CH110 | CH151 |
| |||||
11n HT40 | MCS0/8 | ≤ -82dBm | -88 | -88 | -88 | 26dBm | |||
MCS7/15 | ≤ -61dBm | -70 | -70 | -70 | 23dBm | ||||
| CH36 | CH100 | CH149 |
| |||||
11ac HT20 | MCS0 | ≤-82 | -92 | -92 | -92 | 26dBm | |||
MCS8 | ≤-60 | -70 | -70 | -69 | 23dBm | ||||
| CH38 | CH110 | CH151 |
| |||||
11ac HT40 | MCS0 | ≤-79 | -90 | -89 | -89 | 25dBm | |||
MCS9 | ≤-60 | -66 | -65 | -65 | 22dBm | ||||
| CH42 | CH106 | CH155 |
| |||||
11ac HT80 | MCS0 | ≤-79 | -87 | -87 | -87 | 24dBm | |||
MCS9 | ≤-54 | -62 | -61 | -61 | 21dBm | ||||
Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption | ||||||||
Chipset | Qualcomm QCA9531 + QCA9887 | ||||||||
Memory | 128MB DDR2 RAM | ||||||||
Flash | 16MB | ||||||||
Interface | 1 * 10/100 Mbps RJ45 WAN Port | ||||||||
1 * 10/100Mbps RJ45 LAN Port | |||||||||
1 * Reset button, press 15 seconds to revert to default setting | |||||||||
Antenna | Build in 5dBi MIMO Antenna | ||||||||
Power consumption | PoE: A771: IEEE 802.3af, 15W(Full Load) A770: 24V Passive PoE, 12W DC: 12V/1.5A | ||||||||
Software | |||||||||
Standard Version | Bandwidth: 20Mhz, 20/40Mhz, 80Mhz | ||||||||
Operation Mode | Gateway, Wireless AP, Repeater, WISP | ||||||||
SSID No | 4 SSID for 2.4G, 4SSID for 5.8G | ||||||||
Factory Default Setting | Yes | ||||||||
Centralized Management by AC Controller | Yes | ||||||||
Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter | ||||||||
Protocols | IPv4 | ||||||||
Others: | |||||||||
Package Contents | 750Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory | ||||||||
System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux | ||||||||
Environment | Operating Temperature: -20~55 ℃ Storage Temperature: -40~70 ℃ (-40 ℉~158℉) Storage Humidity: 5%~90% non-condensing | ||||||||
OEM & ODM service in Outdoor Wi-Fi bridge, IoT gateway, 4G router
https://yuncore.en.alibaba.com/
Shenzhen Yunlink Technology Co., LTD is a professional wireless networking equipment manufacturer and solution provider. With excellent technology, high quality and perfect service, It supply OEM & ODM products and solutions for world-wide clients..
Focused on WiFi Technology, Shenzhen Yunlink Technology Co., Ltd develop and produce Wireless Networking equipment mainly, such as 11ac serials & 11n serials Ceiling Wireless Access Point, Outdoor CPE, In wall Access Point, Wireless Router & WiFi Repeater; Ethernet (PoE) Switch, Access Controller System, WLAN Adapter, 3G/4G Router, Etherprise Router, Cloud Server.
POE wireless 300m access point/WiFi Access Point/Router/wireless Repeater/, ceiling AP,2.4GHz
Contact: | M.P and WhatsApp |
Mr. Jessy | +86-13760492976 |
Mr. Kimi | +86-13632614875 |
Mr. Stone | +86-18825212132 |
Mr. Leckie | +86-18676731545 |
Mr. Jo | +86-13652404407 |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier