Main Features:
★ HID high rejection quality sheet;
★ Long service life for reducing the cost;★ High stabilized rejection with realized nominal flux;
★ Sanitary qualified elements;
★ Stringent in-house inspection & testing control.
Model | TFC-3012-200 | TFC-3012-300 | TFC-3012-400 | RT-3020HF | |||||
Performance | Stable Desalination % | 97 | 97 | 97 | 98 | ||||
Min. Desalination % | 95 | 95 | 95 | 97 | |||||
Mean Permeable Flow GPD (L/d) | 200 (760) | 300 (1135) | 400 (1512) | 600 (2280) | |||||
Active Film Area ft2(m2) | 10 (1.0) | 14 (1.4) | 16 (1.92) | 26 (2.4) | |||||
Test Conditions | Pressure | 65psi (0.45Mpa) | 150psi (1.03Mpa) | ||||||
Water Temp. | 25℃ | ||||||||
Concentration (NaCl) | 500ppm | ||||||||
Water PH | 6.5 to 7.5 | ||||||||
Recovery Rate % | 15 | ||||||||
Operating Conditions | Max. Operating Pressure | 300psi (2.07Mpa) | 500psi (3.45Mpa) | ||||||
Max. Feed Water Temp. | 45℃ | ||||||||
Max. Feed Water Silt Density Index (SDI) | 5 | ||||||||
Feed Water Chlorine Tolerance | < 0.1ppm | ||||||||
Feed Water PH Range, Continuous Operation | 3 to 10 | ||||||||
Feed Water PH Range, Short-Term Cleaning | 2 to 12 | ||||||||
Max. Pressure Drop of Single Membrane | 10psi (0.07Mpa) | ||||||||
1. Permeate flow rate and salt rejection is based on testing conditions: 250C, pH 7.5, 20% recovery. 2. Stabilized salt rejection is generally achieved within 24-48 hours of continuous use, depending upon feedwater characteristics and operating conditions. 3. Active area guaranteed +/- 3% |