80 watt driver unit 80 watt ip67waterproof led driver 12volts 24volts
Feature:
LED driving power supply is a power converter that converts the power supply into a specific voltage and current to drive the LED to emit light. Generally, the input of the LED driving power source includes high-voltage power frequency alternating current (ie, commercial power), low-voltage direct current, high-voltage direct current, low voltage high. Frequency communication (such as the output of an electronic transformer).
The output of the LED driver is mostly a constant current source that changes the voltage as the LED's forward voltage drop changes.
Specification:
1. High reliability Special drive power for LED street lights, installed at high altitude, with waterproof aluminum shell drive power supply
2. High efficiency LED is an energy-saving product, and the efficiency of driving power supply is high.
3. High power factor Power factor is the grid's load requirements.
4. Drive mode There are two types of traffic: one is a constant voltage source for multiple constant current sources, and each constant current source supplies power to each LED separately.
5. Surge Protection LED's ability to withstand surge is relatively poor, especially against reverse voltage capability.
6. Protection function In addition to the conventional protection function, it is better to increase the LED temperature negative feedback in the constant current output to prevent the LED temperature from being too high.
7. Protection aspects The external installation of the lamp, the power supply structure should be waterproof and moisture-proof, and the outer casing should be light-resistant.
8. The life of the drive power should be matched to the life of the LED.
9. To comply with safety and electromagnetic compatibility requirements.
Parameter:
60w LED ELECTRONICS DRIVER | |
Input Voltage | AC100-240V 50/60Hz |
Rated Output Power | 80W |
Output Current Range | 12V6.7A/24V3.3A |
Waterproof Rating | IP67 |
Application | Used in LED Lamps such as Lampposts,street lamps,spotlights,etc |
Rated Input Voltage | 100-240VAC |
Power Supply Working Range | 90V-250VAC |
Rated Input Frequency | 50-60Hz |
Input Frequency Range | 47-63Hz |
Efficiency | 220VAC >82% |
Surge Current | 240VAC <25A |
MAX.Input Current | 0.8A@180VAC |
Output Voltage Ripple | Vp-p MAX<100mV |
Dimension | 178*70*40mm |
Input and Output Wiring Terminal | Brown Line : L |
Blue Line : N | |
Yellow-Green Line : Ground | |
Output Two Core White lines,300mm,0.75mm2,Two-wire parallel | |
Blue Line: Connect LED Negative | |
Brown Line: Connect LED Positive | |
Operating Temperature Range | -25℃ to +60℃ |
Operating Temperature Range | -40℃ to +70℃ |
Humidity | 30%~100% relative humidity(no condensation) |
Temperature Protection | The product is internally set to 85 degrees of protection, and the automatic drama recovery after temperature drop |
Overvoltage Protection | When the product fails, the output voltage reaches 130% of the rated voltage. The internal components of the product break down and there is no output, thus protecting the external equipment. |
Short-circuit Protection | When the output is short-circuited, the product is protected and the input mode is less than 20W. |
Overcurrent Protection | When the current reaches 8A-10A, the product protection has no output. |
Package&Shipment:
Company: