75NC semi-automatic large diameter pipe bending machine for stainless steel and iron tube

75 NC semi-automatic pipe bending machine single head hydraulic bending machine

This model is an economical automatic three-dimensional CNC pipe bending machine, which can automatically bend, automatically feed and automatically tilt the angle. The three-dimensional pipe fittings can be automatically bent at one time. The feeding, tilting and bending three axes are all The servo motor and servo drive are used to control the drive, and the auxiliary push adjusts the matching speed through the regulating valve.

The feeding, tilting and bending three axes can be set to 1-8 speed according to the actual workpiece condition.

The electronic control system adopts well-known brand controllers and super large PLCs with strong performance and good stability.

Equipped with 10.4′′ color touch screen, man-machine dialogue operation, easy to understand. All elbow data can be input through touch screen.

There are two kinds of feeding modes: direct feeding and pinching. When the core is not worn, the pinning method can be used, and the feeding can be repeated, and the length of the workpiece is not limited.

Manual, semi-automatic, fully automatic operation mode can be set. Manual decomposing can be used during the trial to observe the interference point and modify the action.

Each bend can be set to feed, bend, and rotate the three axes to move or move differently to avoid interference points, thus improving production efficiency. There are eight ways to choose from: 1 feeding → retreating → tilting; 2 (feeding + reversing) → tilting; 3 (feeding + reversing + tilting); 4 feeding → tilting → reversing; 5 ( Feeding + tilting → returning; 6 retreating → feeding → tilting; 7 tilting → retreating → feeding; 8 retreating → (feeding + tilting).

When the direct feeding mode is selected, the function of measuring the bending and stretching ratio of the pipe fittings is convenient, and the actual length of the pipe fittings is easily calculated.

There are two-axis simultaneous zero function, just press the button. It is not necessary to return the two axes to zero, which saves time and accuracy.

There is an automatic detection error or machine failure function, and it is displayed on the screen for easy operator elimination.