70mm corn straw wheat straw charcoal solid briquette machine

MSW briquette machine RDF briquette machine waste plastic briquette machine

20mm 40mm 50mm 80mm firewood charcoal solid briquette machine

70mm corn straw wheat straw charcoal solid briquette machine

1. Capacity:

0.6~0.9ton per hour wood straw briquette line

1.2~1.6ton per hour wood straw briquette line

1.6-2ton per hour wood straw briquette line

2. raw materials are wood sawdust wheat and other straw, after qualified crushing, screening process, raw material particle size ≤20 mm, water content less than 20%, must not contain metal, stone and other hard blocks that affect the stable operation of the production line.

3. Briquette diameter 20mm-80mm

4. Briquette line 3D drawing design

Biomass wood sawudust briquette machine applies the principle of center crank slider mechanism in plane four-bar mechanism, and reciprocating stamping makes the raw material to briquette.

It is mainly used to make loose or crushed wood removal board powder, crop straw, bark branch, firewood grass, rice husk, sawdust, general industrial solid waste (carpet, clothing, leather factory scrap) and other biomass raw materials or garbage derived fuels into rod shape under suitable conditions of pressure, temperature, particle size and moisture content, so as to improve the combustion performance of fuel. Biomass fuel or waste-derived fuel produced by this equipment is a new type of renewable and environment-friendly fuel, which has the characteristics of clean, high calorific value, high combustion efficiency and so on. It can be used as fuel for combustion furnace, boiler and power generation furnace. It can be used as a substitute for coal in many fieldsting biomass fuel can also be carbonized to meet the demand for high grade energy in production and life.

Raw materials with good fluidity wood / sawdust building formwork / agroforestry waste materials with poor fluidity solid waste (clothing factory / leather factory / blanket factory etc. scrap)/ corn straw.

- Raw material special case: sawdust/removal board powder / peanut shell / rice husk / furniture factory dust - material characteristics: good fluidity, no caking in short time - production line basic process: crushing → iron removal → crushing → buffer molding → storage - this kind of production line characteristics: small occupation, high concentration, depending on the material's own gravity flow.

In the mould, the forming mode of one hole corresponding to one rod greatly improves the forming efficiency and removes the waste of invalid work, which saves energy consumption and increases output. According to the different wear areas, the die body is divided into die after the die, in the die, before the die, further reduce the loss cost of the die. Molding die use nested combination, effectively reduce the cost of die loss.

SHANDONG LONGZE MECHANICAL EQUIPMENT CO.,LTD is a high-tech enterprise specializing in the development of biomass, agricultural and forestry wastes, garbage rdf derivative solidified briquetting fuel machinery and the development, production and sale of related products. The company has strong technical research and development ability and exquisite machining ability, with advanced technology and equipment, perfect quality inspection system. The company's new stamping type biomass (fuel) curing molding equipment, after several years of continuous research and development and customer use feedback, products continue to improve and improve, in the machine structure, lubrication, cooling, sealing dustproof, oil prevention, feed, discharge molding, punching rod and mold, output, energy consumption and other aspects of major breakthroughs, has been a number of national invention patents. Longze company has become the main supplier of domestic biomass fuel curing molding equipment, which is highly recognized by the industry. Products have been widely used throughout the country.