Following are the features of our switching power supply schematic:
1. Low price and high reliability
2. AC input power suitable for the world
3. High efficiency and low operation temperature
4. Soft-start current can reduce the AC input impact efficiency
5. With short-circuit and overload protection
6. Compact size, light weight
7. 100% full-load burn-in test
8. Installed with EMI filter, minimum wave
Parameter of switching power supply schematic:
Input Voltage Range | 176~265VAC/220-370VDC |
Input Frequency | 47~63HZ |
Surge Current | 40A230VAC(Cold Position) |
Insulating Strength | Vin~Vout/1500VAC/min Vin~FG/1500VAC/min Vout~FG/500VAC/min |
Leakage Current | <0.5Ma/230VAC |
Protection Function | Short-circuit protection (self-recovery) Overload protection115%-150% (self-recovery) |
Average Fault-free Interval Time | MTBF≥5X105h |
Safety Standards | Design meet GB4943. EN60950. UL60950 |
EMC Standards | Design meet EN55022. ClassA EN61000-3-2,3 EN61000-4-2,34,5,6,8,11 |
Linear Adjustment Rate | ≤0.5% |
Output Voltage adjustment range | ±10% |
Risetime | 50ms(230Vac, full load) |
Retention Time | 20ms(230Vac, full load) |
Operation Temperature | 0°C~45°C@100%, -10°C@80%, 60°C@40% |
Storage Temperature | -20°C~85°C |
Relative Humidity | 20%~90%RH(No condensation) |
To make model choose easier, following is parameter selection table of switching power supply schematic:
Product Model Selection Chart | |||
Model | Output Voltage/Output Current | Ripple | Typical Efficiency |
TL-200S-5 | 5V/40A | 100mV | 79% |
TL-200S-9 | 9V/22A | 100mV | 80% |
TL-200S-12 | 12V/17A | 100mV | 82% |
TL-200S-24 | 24V/8.3A | 100mV | 83% |
TL-200S-48 | 48V/4.2A | 100mV | 85% |
1. Are you factory?
Yes, we are facotry, and we produce stepper motor/driver, Servo motor/driver.
2. How to select models?
Before purchasing, please contact us to confirm model No. and specifications to avoid any misunderstanding.
3. How do you ship the goods?
Sea and by air, also accept customer appointed.
4. Can I test sample?
Yes, sample charged can be offered for testing.
5. Can we be agent or distributor?
Yes, welcome and we will support you.
6. Can you do OEM or ODM service?
Yes, we have R&D department and accept OEM and ODM service.