aluminium oxide fiber cutting disc
Introduction : Fiber Disc is based on hard fibre vulcanized paper, the abrasive are consolidated on the hard fibre vulcanized paper by synthetic resin bond. They are suitable for rust removal, paint stripping, deburring, grinding welding seam, polishing on all kinds surface of metal or non-metallic materials.
Feature:
Type |
Roundness with hole |
Size |
4",4.5",5",6",7"
|
Grit |
p24-p320 |
Material |
Aluminum oxide, silicon carbide, or zirconia alumina |
Rate |
80 m/s |
Packing |
50-100pcs/inner box,250-1000pcs/ctn,or as customer's requirement |
Application |
1. Mainly is used in shipbuilding industry in the steel surface prior to paint ugh grinding; 2. The construction industry of cement concrete roadbed, steps such as horizontal flat grinding; 3. Widely used in shipbuilding, aviation, automobile, petroleum, construction and installation, etc. The product is the large metal and nonmetal materials derusting, paint, burr removal, grinding weld of high efficiency grinding tool. |
Technical parameter
Dia(mm/inch) | B(inch) | CP | Max speed(R.P.M) | Qty(pcs) | Meas.(cm) | N.W./G.W. |
100/4" | 5/8" | 16-24 | 15200 | 600 | 44*33*16 | 12/14 |
5/8" | 36-120 | 15200 | 1200 | 44*33*16 | 14/16 | |
115/4.5" | 7/8" | 16-24 | 13300 | 500 | 26*26*38 | 14/16 |
7/8" | 36-120 | 13300 | 1000 | 26*26*43 | 16/18 | |
125/5" | 7/8" | 16-24 | 12500 | 500 | 28*28*38 | 16/18 |
7/8" | 36-120 | 12500 | 1000 | 28*28*43 | 18/20 | |
150/6" | 7/8" | 16-24 | 10300 | 300 | 33*33*23 | 12/14 |
7/8" | 36-120 | 10300 | 600 | 33*33*26 | 14/16 | |
178/7" | 7/8" | 16-24 | 8500 | 200 | 39*39*16 | 12/14 |
7/8" | 36-120 | 8500 | 400 | 39*39*18 | 15/17 | |
230/9" | 7/8" | 16-24 | 6500 | 200 | 48*48*16 | 14/16 |
7/8" | 36-120 | 6500 | 400 | 48*48*18 | 17/19 |
....