6v 12v 18v 24v 36v ac dc adapter switching power supply
White are available
USB Type
UK, US, EU,AU Input plugs are available
PRODUCT HIGHLIGHT:
|
Protection: |
Short circuit protection. |
Safety approvals: |
UL60950 3 rd edition CAN/CSA C22.2 NO.60950 EN60950:2000 |
Emission: |
FCC Part15 class B |
Immunity: |
EN55024/A1:2001 |
Reliability: | |||
Burn-in: | 100% full load ,40 ±5℃,4Hrs min. | Leakage Current : | 0.25mA max. at 254Vac. |
Withstanding Voltage : | (between primary & secondary) 3000Vac 1 minute 10mA max. | MTBF : | meet MIL-HDBK-217F over 50K hours, full load,25 degree |
Description | Symbol | Min | Typ | Max | Units | Comment |
Input | ||||||
Voltage | V IN | 90 | 120/240 | 264 | V AC | 2 Wire no Protective Ground |
Frequency | F LINE | 47 | 50/60 | 63 | Hz | |
No-load Input Power(230VAC) | 0.3 | W | ||||
Efficiency | η | 75 | % | |||
Inrush Current(240Vac) | I | 40 | A | |||
Environmental: | ||||||
Operating Temperature | T | 0 | / | 40 | o C | Free convection, Sea level |
Non-operating temperature | T | -20 | / | 80 | o C | Free convection, Sea level |
Operating humidity | T | 10 | / | 90 | %RH | Non condensing |
Non-operating humidity | T | 10 | / | 90 | %RH | Non condensing |
Typical model list:
Input Condition | DC Output Voltage | DC Output Current | Output Voltage Precision | Ripple & Noises | Regulation | Maximal Output Power | ||
Line | Load | |||||||
Input Voltage: 90-264Vac
Frequency:
Input current: 0.6A |
1 | 3.0-4.0V | 0.1-4.0A | 6% | 100mV | ±1% | ±5% | 16W |
2 | 4.1-6.0V | 0.08-4.0A | 6% | 100mV | ±1% | ±5% | 24W | |
3 | 6.1-6.9V | 0.07-4.1A | 6% | 100mV | ±1% | ±5% | 25W | |
4 | 7.0-8.0V | 0.06-3.57A | 5% | 100mV | ±1% | ±5% | 25W | |
5 | 8.1-9.0V | 0.055-3.09A | 5% | 100mV | ±1% | ±5% | 25W | |
6 | 9.1-10.0V | 0.05-2.75A | 5% | 100mV | ±1% | ±5% | 25W | |
7 | 11.1-11.9V | 0.04-2.25A | 5% | 100mV | ±1% | ±5% | 25W | |
8 | 12.0-17.9V | 0.04-2.5A | 5% | 100mV | ±1% | ±5% | 30W | |
9 | 18.2-22V | 0.035-1.67A | 5% | 100mV | ±1% | ±5% | 30W | |
10 | 22.1-30.0V | 0.03-1.36A | 5% | 100mV | ±1% | ±5% | 30W | |
11 | 30.5-31V | 0.025-0.98A | 5% | 150mV | ±1% | ±5% | 30W | |
12 | 31.5-48V | 0.02-0.95A | 5% | 150mV | ±1% | ±5% | 30W | |
REMARK: ( ripple and noise) 1. Measurements shall be made with an oscilloscope with 20MHz bandwidth. 2. Outputs shall be bypassed at the connector with a 0.1u F ceramic disk capacitor and a 10u F electrolytic Capacitor to simulate system loading. |
||||||||
http://www.niteray.com/spec/25W.pdf |