6s 10A PCM BMS for 22.2V Li-ion/Lithium/ Li-Polymer 18V LiFePO4 Battery Pack Size L64*W50*T5mm(PCM-L06S12-520)
Technical parameter
Product name:Protection Circuit Module
Model No:PCM-L06S12-520
For 6S Lithium-ion/Lithium Polymer/LiFePO4 Battery Packs
Product Feature:
1. there are over charging, over discharge,short circuit, overcurrent protection, etc.
2. Balanced function.
3. Charge discharge common interface
Items | Specifications | ||
Lithium-ion/Lithium Polymer | LiFePO4 | ||
Charge | Charging voltage(CC/CV)-6S | CC/CV:25.2V | CC/CV:21.6V |
Maximal continuous charging current | 10A | ||
Discharge | Maximal continuous discharging current | 10A | |
Low current consumption | Current consumption on operation | 10μA | |
Current consumption at power down | <0.1µA | ||
Cell-balance | Cell-balance detection voltage | 4.20 ± 0.03 V | 3.60 ± 0.03 V |
Cell-balance release voltage | 4.20 ± 0.03 V | 3.60 ± 0.03 V | |
Cell-balance current | 62 ±3mA | 58 ±3mA | |
Over-charge | Overcharge detection voltage | 4.25±0.025V | 3.900 ± 0.025V |
Overcharge release voltage | 4.15±0.05V | 3.800 ± 0.050V | |
Overcharge delay time | 0.5~2S | ||
Over-discharge | Overdischarge detection voltage | 2.50±0.062V | 2.00±0.080V |
Overdischarge release voltage | 3.0±0.075V | 2.30±0.100V | |
Overdischarge delay time | 115-173mS | ||
Discharge overcurrent | Discharge overcurrent detection voltage | 0.2±0.015V | 0.10±0.015V |
Discharge overcurrent delay time | 5~15ms | ||
Discharge overcurrent protection | 25±5A | ||
Release condition | Cut-off-load | ||
Short-circuiting protection | Load short-circuiting detection voltage | / | / |
Detection condition | Exterior short circuit | ||
Load short-circuiting detection delay time | 200~800μs | ||
Release condition | Cut-off-load | ||
Internal resistance | Static Drain-Source On-Resistance | <30mΩ(B- to P-) | |
Temperature | Wide range of operation temperature | 40 ~ + 85℃ | |
Storage Temperature Range | -40 ~ +125℃ | ||
Dimension | L64*W50*T5mm | ||
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier