6CTA8.3-M188 Marine engine 6 Cylinder engine
6CTA8.3-M188 Marine Engine 6 Cylinder Engine
Engine Technical Datasheet
6CTA8.3-M188 is In-line, 6 cylinder, 4 Cycle, water cooled turbocharged Engine
| Displacement | 8.3 L |
| Bore | 114 mm |
| Stroke | 135 mm |
| No. of Cylinders | 6 |
| Fuel Injection Pump | AD(WF) Injection Pump |
| Rated power | 138 kW/ 2200r/ min |
| Rated Speed | 2200 r/min |
| Aspiration | turbocharged |
| Lubricant Capacity | 19 L |
| Coolant Capacity (engine only) | 12.3 L |
| Compression Ratio | 17.3:1 |
| Maximum Back Pressure | 1356 N.m |
6CTA8.3-M188 Marine Engine 6 Cylinder engine Performance curve
1. TORQUE (N.m)
2. POWER (kW)
3. FUEL CONSUMPTION (l/hr)
Characteristics:
Intergrated building block system structural put engine contains up to 25% fewer parts than competitive engines in its class, ensure design intensity to through strict basis of test experiment, reduce the size od parts reasonable, not only to reduce the size and weight of diesel, but also bring down the failure rate and maintenance costs. Put turbocharged/ turbocharged and aftercooled as major products to improve the dynamic character and economical effience. Efficient fuel supply system and air intake system put fuel and air mixed Fuller, burning totally and lower discharge of pollutants.
Engine picture took on praticality:
6CTA8.3-M188 Marine Engine 6 Cylinder engine
Packing : Standard wooden case
DCEC has been certificated:
1. ISO/TS16949: 2002 Quality Management System
2. ISO14001 Environment Management System
3. OHSAS18001 Occupation Health and Safety Management System
| Engine Model | Rated power/speed (kw/rpm) |
Peak Power/speed (KW/rpm) |
Aspiration | Overall Dimension |
| 4BTA3.9-GM47 | 47/1500 | 52/1500 | water cooled turbocharged | 765*675*837 |
| 4BTA3.9-GM65 | 65/1800 | 71/1800 | water cooled turbocharged | 765*675*837 |
| 6BT5.9-GM80 | 80/1500 | 88/1500 | turbocharged | 1021*675*986 |
| 6BT5.9-GM83 | 83/1500 | 92/1500 | turbocharged | 1021*675*986 |
| 6BT5.9-GM100 | 100/1800 | 110/1800 | turbocharged | 1021*675*986 |
| 6BTA5.9-GM100 | 100/1500 | 110/1500 | water cooled turbocharged | 1021*675*986 |
| 6BTA5.9-GM120 | 120/1800 | 132/1800 | water cooled turbocharged | 1021*675*986 |
| 6BTAA5.9-GM115 | 120/1500 | 132/1500 | Turbocharged & Air-Air Aftercooled | 1021*675*986 |
| 6CT8.3-GM115 | 115/1500 | 126/1500 | turbocharged | 1149*767*1060 |
| 6CT8.3-GM129 | 129/1800 | 142/1800 | turbocharged | 1149*767*1060 |
| 6CT8.3-GM155 | 155/1500 | 170/1500 | turbocharged | 1149*767*1060 |
| 6CTA8.3-GM155(IMO) | 155/1500 | 170/1500 | water cooled turbocharged | 1149*767*1060 |
| 6CTA8.3-GM175 | 175/1800 | 193/1800 | water cooled turbocharged | 1149*767*1060 |
| 6LTAA8.9-GM200 | 200/1500 | 220/1500 | Turbocharged & Air-Air Aftercooled | 1029*881*1085 |
| 6LTAA8.9-GM215 | 215/1800 | 237/1800 | Turbocharged & Air-Air Aftercooled | 1029*881*1085 |
| 6BT5.9-M120 | 90/2200 | 100/2270 | turbocharged | 1021*675*986 |
| 6BTA5.9-M150 | 110/2200 | 120/2270 | water cooled turbocharged | 1021*675*986 |
| 6BTA5.9-M150 | 110/1800 | 120/1858 | water cooled turbocharged | 1021*675*986 |
| 6CTA8.3-M188 | 138/2328 | 152/2400 | water cooled turbocharged | 1149*767*1060 |
| 6CTA8.3-M205 | 151/2328 | 166/2400 | water cooled turbocharged | 1149*767*1060 |
| 6CTA8.3-M220 | 164/1800 | 180/1885 | water cooled turbocharged | 1149*767*1060 |
| 6CTAA8.3-M260 | 190/2134 | 209/2200 | Turbocharged & Air-Air Aftercooled | 1149*767*1060 |
| 6LTAA8.9-M300 | 224/1800 | 245/1885 | Turbocharged & Air-Air Aftercooled | 1029*881*1085 |
| 6LTAA8.9-M315 | 230/1800 | 253/1885 | Turbocharged & Air-Air Aftercooled | 1029*881*1085 |
Our adventages:
1. Plenty of spare parts
2. After sales service overseas
3. Brands new with competitive price
4. Manufacture gas engine by ourselves
5. Supply Generator set
6. All pictures are shot based on practicality
7. Professional technical team can refit the engine if you need(based on your special requirement)
Hubei Bohang Power Technology Co., Ltd. is a comprehensive enterprise specialized in selling engine assembly and engine parts and designing and processing mechanical parts, located in Xiangyang City, Hubei Province. Our company has complete production equipment and testing equipment, and gets approval of import and export rights by State Economic and Trade Commission. With a highly qualified and efficient team, our products sell well all over the world and win a good reputation from new and old customers.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier