No | Material | Technical Information | Use |
1 | Fabric for the combat suit dyed and printed in color mosaic -- 5 colors: - Dark brown, light brown, green, kaki-beige and light beige - Ultramarie blue, aviation blue, light green, grey-blue and blue | - Terrestrial forces - Air forces | |
2 | Zipper with founded teeth (5.7mm) detachable with 2 sliders, kaki or navy blue color. | Type YKK or equivalent | - frontal closing jacket |
3 | Polyester buttons with 4 vents, Ø 15 mm – T24, kaki or navy blue color | - Closing trouser slit and waistband | |
4 | Interlining, non-woven support - Weight 30 g/sqm - Adhensivation: 48 points/ cm² | - Reinforcement for the cap toes, jacket and trousers pocket flaps, collar's front, loops, trousers fillets | |
5 | Knitted elastic, width 25 mm, kaki or navy blue color: - Width 8 mm - Weight 4.5 +/- 0.7 g/ml | - Trousers waistband | |
6 | Knitted cord from polyester yarns type cotton, kaki or navy blue color: - Width 8 mm - Weight 4.5 +/- 0.7 g/ml | - Adjusting trousers ending - Adjusting waistband | |
7 | Plastic stoppers | - Adjusting system in the waist | |
8 | Velcro tape with curls, kaki or navy blue color - Width 25 mm - Composition 100% polyamide - Weight 8.956 g/ml +/-1 | - Support for badges - chests | |
Velcro tape with curls and hooks, kaki or navy blue color - Composition 100% polyamide - Width 25 mm - Weight 17.01 g/ml +/- 1 | - Vertical feints - Flaps and pockets (jacket and trouser) - Fixing loop for the badges | ||
9 | - Width 40 mmm - Weight 27.206 g/ml +/-1 | - Adjusting the sleeves endings | |
- Width 100 mm - Weight 68.04g/ml +/-2 | - Support for the movable flaps and badges | ||
10 | Polyester thread, finesse 50/3, kaki or navy blue color | STAS 11626-90 | - Ornament stitches on the pockets flaps, feints, stitches on the jacket and trousers lateral seams |
11 | Polyester thread, finesse 75/3, kaki or navy blue color | STAS 11626-90 | - Assembling, buttonholes, reinforcement stitches and buttons |
12 | Polyester thread, finesse 80/2, kaki or navy blue color | STAS 11626-90 | - Cover looking |
13 | Size, composition and maintenance label | - Marking of the suit | |
14 | Polyethylene bag 60 x 90 (cm x cm) | - Packing |
No | Tech. characteristics | U/M | Values | Tol +/- |
1 | Composition | % | 57+/-3 cotton 43+/-3 polyester | SR EN ISO 1833-2011 |
2 | Weight | g/sqm | 215+/-10 | SR EN 2117-03 |
3 | Density in warp | Yarns/10 cm | 420+/-20 | SR EN 1049/2-00 |
4 | Density in weft | Yarns/10 cm | 220+/-10 | SR EN 1049/2-00 |
5 | Binding | Diagonal 3/1 with rip stop yarns | SR 6431-12 | |
6 | Breaking resistance in warp, min. | daN | 155 | SR EN ISO 13934/1-13 |
7 | Breaking resistance in weft, min. | daN | 60 | SR EN ISO 13934/1-13 |
8 | Tearing resistance in warp, min. | N | 75 | SR EN ISO 13937/3-2002 |
9 | Tearing resistance in weft, min. | N | 45 | SR EN ISO 13937/3-2002 |
10 | Dimensional modification at washing in warp and weft, at 40°C – after 5 washings - In warp - In weft | % | +/- 2.5 +/- 2.0 | SR EN ISO 6330-2012 SR EN ISO 5077-2008 |
11 | Resistance to superficial damping (splashing test) | Etalon | 90 (ISO 4) | SR EN ISO 4920-2013 |
12 | Air permeability | 1/m²/s | 130 | SR EN ISO 9237:1999, pressure 100 Pa |
13 | Abrasion resistance, min. | Cycles | 200.000 | SR EN ISO 12947-2:2002 pressure on test specimen 9 kPa |
14 | Piling, min. | Degree | 4-5 | SR EN ISO 12945-2:2002 pressure on test specimen 9 kPa, 7000 cycles |
15 | Oilphobisation, min. - Initially - After 5 washings at 40°C | Degree | 6 3 | |
16 | Minimum dying and printing resistances after 1 washing at 40°C - Color modification - Color failure | 5 4-5/5/4-5/5/5/4-5 | SR EN ISO 105-C06:2010 | |
17 | Minimum dying and printing resistances after 25 washing at 40°C - Color modification - Color failure | 4 4/4-5/4/4-5/4-5/4 | SR EN ISO 105-C06:2010 | |
18 | Minimum dying and printing resistances to water - Color modification - Color failure | 5 4-5/5/4-5/5/5/4-5 | SR EN ISO 105-E01:2013 | |
19 | Minimum dying and printing resistances to acid and alkaline sweating - Color modification - Color failure | Marks | 5 5/5/4-5/5/5/5 | SR EN ISO 105-E04:2013 |
20 | Minimum dying and printing resistances to dry cleaning with perchlorethylene - Color modification - Color failure | Marks | 5 5/5/4-5/5/5/5 | SR EN ISO 105-D01:2010 |
21 | Minimum dying and printing resistances to dry rubbing | Marks | 4-5 | SR EN ISO 105-X12-2003 |
22 | Minimum dying and printing resistances to humid rubbing | Marks | 4 | SR EN ISO 105-X12-2003 |
- put in a poly bag.
- And packed in one carton box.
Delivery
Q: Are you a trading company or a factory?
A: We are a trading company cooperate with professional factories. Our office is located in Shanghai Pilot Free Trade Zone and welcome to visit us.
Q: How about the quality of your product?
A: Quality is one of the most important conditions to long-term relationship.
Q: Can you provide OEM service?
A: Yes, we accept to do OEM business.
Q: Do you accept the small order?
A: Sure, if your order quantity is less than the MOQ, we can also accept and will try our best to give you the reasonable price with diligent service.
Q: Should we pay for the sample cost?
A: Customers should pay for the sample cost first, but they will surely get the refund after confirming the order.
Q: Can you provide SGS test report of fabric and inspection report?
A: Yes, we can provide all kinds of test port as requested.
Q: How can we pay you?
A: Our company can accept both T/T, and L/C payment.
If you have any other payment requirements, please contact our online salesman or send E-mail to us.