Model | Peak voltage | Measuring range | Weight | Purpose |
BVLF-30 | 30KV | 0.1Hz,≤1.1µF | Controller: 4 kg Booster: 25 kg Size: L*W*H 323*174*323 | 10KV and below voltage cable, generator |
0.05Hz,≤2.2µF | ||||
0.02Hz,≤5.5µF | ||||
BVLF-40 | 40KV | 0.1Hz,≤1.1µF | Controller: 5 kg Booster: 30 kg Size: L*W*H 357*208*343 | 13.8KV and below voltage cable, generator |
0.05Hz,≤2.2µF | ||||
0.02Hz,≤5.5µF | ||||
BVLF-50 | 50KV | 0.1Hz,≤1.1µF | Controller: 6 kg Booster: 45 kg Size: L*W*H 357*210*365 | 15.75KV and below voltage cable, generator |
0.05Hz,≤2.2µF | ||||
0.02Hz,≤5.5µF | ||||
BVLF-60 | 60KV | 0.1Hz,≤1.1µF | Controller: 6 kg Booster: 50 kg Size: L*W*H 357*220*370 | 18KV and below voltage cable, generator |
0.05Hz,≤2.2µF | ||||
0.02Hz,≤5.5µF | ||||
BVLF- 90 | 90KV | 0.1Hz,≤1.1µF | Controller: 8 kg Booster: 90 kg Size: L*W*H 357*240*390 | 35KV and below voltage cable, generator |
Compare content | Power frequency withstand voltage | Frequency withstand voltage | 0.1Hz Withstand voltage | DC withstand voltage |
Equivalence | Good | Good | good | poor |
Insulation destructive | small | small | small | big |
Operational safety | Lower | Lower | high | Lower |
Test wiring | complex | most complicated | the easiest | complex |
Equipment volume | maximum | larger | small | least |
0.1Hz Pressure equipment type | High voltage control method | High voltage waveform | Energy saving | noise | Mechanical life | Electric life |
Mechanical | High voltage mechanical switch to switch polarity | Square wave | Not energy efficient: Use high-power resistors to consume excess energy | high-up | short | short |
Electronic | High voltage electronic switch to switch polarity | Sine wave | Energy saving:Feed excess power back to the grid | slight | No | long |