608 6803 6804 6805 series ZZ 2RS OPEN deep groove ball bearing
We usually manufacture all kinds of deep groove ball bearings and their deformed series of products.6000, 6200, 6300, 6400, 6800, 6900, 1600 series are all availableWe can offer open, Z, ZZ, RS, 2RS, RSV, 2RSV, RZ, 2RZ, N, NR specafications.
Deep groove ball bearings 6200RS:
1)The single row deep groove ball bearing are simple in design, non-separable, suitable for high and even very high speeds and are robust in operation, requiring little maintenance.
2) Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads, even at high speeds.
3) Deep-groove bearings have higher load ratings for their size than shallow-groove , but are also less tolerant of misalignment of the inner and outer races.
4) A misaligned shallow-groove bearing may support a larger load than the same sized deep-groove bearing with similar misalignment.
5) This kind of bearing is also available both in open design and sealed design.
6) The seals way of the bearing: RS: contact seal on one side of the bearing
2RS: contact seals on both sides of the bearing
Z: shield on one side of the bearing
ZZ(2Z): shields on both sides of the bearing.
7)special processing on surface or with rubber covers to proofing water,proofing dust and with good sealing.(RS,2RS)
8) Bearing with -RS seals has better sealing but lower limited speed compared with the bearing with –Z seals.
9)special processing on surface or with iron covers to proofing dust and with good sealing.(ZZ).
10)This kind of bearings can be made of plastic, ceramics, bearing steel, stainless steel.
Applications:
The deep groove ball bearing can be used in many different places such as:
Gearbox, instruments and meters, electric motor, electric appliance, internal combustion engines, transportation vehicles, agricultural machinery, construction machinery, construction machinery, and so on.
Advantages:
Most representative bearing of the rolling bearings
Suitable for high speed even extremely high speed
Durable, less maintenance frequency
Simple structure and low cost
Various sizes and designs.
We supply different specifications of bearings with high and competitive price according to the clients' requirements.
Types Specialized: With ZZ, 2RS OPEN available; Non-standard Bearing;
For more details, please contact us by E-mail or by fax .We are ready to refer you our favorable price and relative samples, for quality evaluation and marketing activities.
FUJIAN FOS BEARING CO.,LTD was established on Oct. 24, 2005, with registered capital of RMB 10 million. "FSZ" is our registered trademark.
Our company is specialized in producing all kinds of bearing units, while also engaged in stainless steel bearing units, zinc alloy bearing units, pressed steel bearing units, deep groove ball bearings, taper roller bearings, spherical roller bearings, ceramic ball bearings and spherical plain bearings. 80% of our products are exported to Europe (mostly Germany & UK), North America, Southeast Asia, Middle East, Africa and Taiwan. And 20% to domestic markets.
The spherical radial ball bearings have UC/UK/UCX/HC/SA/SB/CSB/CSA/CS series, etc. The bearing units have P/F/FL/T/FC/PA/PH/PW/FA/FB/PG/PX/FX/C series, etc. All of the above series have complete moulds, and the materials for bearing units have grey cast iron and ductile iron. The sizes range from 201 to 218 and 305 to 328.