Model Specification | S-600-36 | S-600-12 | S-600-15 | S-600-24 | S-600-48 | ||||
DC Output voltage | 36v | 12V | 15V | 24V | 48V | ||||
Output voltage range(Note:2) | ±2% | ±1% | ±1% | ±1% | ±1% | ||||
Rated output current | 16A | 50A | 40A | 25A | 12.5A | ||||
Output voltage range DC | 0~36v | 0~12V | 0~15V | 0~24V | 0~48V | ||||
Wave and noise(Note:3) | 75mVp-p | 120mVp-p | 150mVp-p | 240mVp-p | 240mVp-p | ||||
Inlet stability(Note:4) | ±0.5% | ±1% | ±1% | ±1% | ±1% | ||||
Load stability(Note:5) | ±1% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||||
DC output power | 600W | 600W | 600W | 600W | 600W | ||||
Efficiency | 86% | 83% | 84% | 86% | 87% | ||||
AC input voltage range | 100-132VAC/190-240VAC selected by switch 47-63Hz | ||||||||
Input current | 5A/230V | ||||||||
Power factor | 0.65 - 0.75 | ||||||||
AC Inrush current | 46A/230V | ||||||||
Leakage current | <3.5mA/240VAC | ||||||||
Overload protection | 120%-150% Reset: auto recovery | ||||||||
Over-voltage protection | 120%-150% | ||||||||
High-temperature protection | ERH3≥65°C~70°CFan on, ≤55°C~60°CFan off, ≥80°C~85°C, Cut off output (5-15V)~(24-48V) | ||||||||
Temperature coefficient | ±0.03%/°C(0~50°C) | ||||||||
Setup, rise, hold up time | 1s, 100ms, 50ms | ||||||||
Vibration | 10~500Hz, 2G 10min,/1 cycle. Period for 60min, Each axes | ||||||||
Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||||||||
Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | ||||||||
Working temperature and humidity | -10°C~+60°C, 10%~95%RH | ||||||||
Store temperature and humidity | -20°C~+85°C, 10%~95%RH | ||||||||
Overall dimension | 215*115*50mm (L*W*H) | ||||||||
Weight | 1.0Kgs | ||||||||
Safety standards | GB4949,UL60950,EN60950 | ||||||||
EMC standards | According to GB9254 EN55022 EN55024 A level design |